JVC M45 manual 7To show the RDS signals information, Tuner operations, On the remote control

Tuner operations

Using the RDS (Radio Data System) when receiving FM stations

RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

When tuned in to an FM station which provides the RDS service, the RDS indicator lights up on the display window.

RDS indicator

With the system, you can receive the following types of RDS signals:

PS (Program Service):	Shows commonly known station names.
PTY (Program Type):	Shows types of broadcast programs.
RT (Radio Text):	Shows text messages the station sends.

Enhanced Other Network: See page 29.

7To show the RDS signals information

On the remote control:

Press RDS DISPLAY while listening to an FM station.

Each time you press the button, the indication on the display window changes to show you the following information:

] PS ] PTY ] RT ] Frequency (Normal indication) ]

(back to the beginning)

PS (Program Service):

While searching, “PS” appears and then the station names will be displayed. “NO PS” appears if no signal is sent.

PTY (Program Type):

While searching, “PTY” appears and then the type of the broadcast program will be displayed. “NO PTY” appears if no signal is sent. RT (Radio Text):

While searching, “RT” appears and then text messages the station sends will be displayed. “NO RT” appears if no signal is sent. Frequency:

Station frequency (non-RDS service).

About characters shown on the display window

When PS, PTY, or RT signals appear on the display window, some special characters and marks may not be displayed correctly.

NOTE

•RDS is not available for AM (MW) broadcasts.

•RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.

NOTE

•If searching finishes at once, “PS”, “PTY”, and “RT” will not appear on the display window.

IMPORTANT

Before using the remote control for the following operation;

1Set the remote control mode selector to

AUDIO.

2Press FM/AM.

Remote control mode selector

27