JVC M45 manual Adjusting the brightness, Using the Sleep Timer, Press DIMMER, Press SLEEP

Basic operations

IMPORTANT

Before using the remote control for the following operation,

• Set the remote control mode selector to AUDIO.

Remote control mode selector

Adjusting the brightness

You can dim the indications on the display window and the illumination lamp level on the center unit.

On the remote control:

Press DIMMER.

Each time you press the button, the brightness level changes as follows;

]OFF ] DIMMER1 ] DIMMER2 ] (back to the beginning)

• OFF: Returns to the normal level.

•DIMMER1: Dims the display window and the illumination lamp.

•DIMMER2: Dims the display window more than DIMMER1 and turns off the illumination lamp.

Using the Sleep Timer

Using the Sleep Timer, you can fall asleep while listening to music and know the system will turn off by itself rather than play all night.

On the remote control:

Press SLEEP.

Each time you press the button, the shut-off time changes as follows;

]0min (cancelled) ] 10min (minutes) ] 20min ] 30min

]60min ] 90min ] 120min ] 150min ] (back to the beginning)

To check the remaining time until the shut-off time

Press SLEEP once.

•The remaining time until the shut-off time appears on the display window for a while.

To change the remaining time until the shut-off time

Press SLEEP repeatedly.

• Each time you press the button, the shut-off time changes.

To cancel the Sleep Timer

Press SLEEP repeatedly until “0min” appears on the display window.

• Turning off the power also cancels the Sleep Timer.

NOTE

•When DVD is selected as the source to play, the system can also turn

off automatically if playback is not restarted within the length of time you have specified (Auto Standby function). (A pg. 53)

•When both the Sleep Timer and Auto Standby function are activated, if the shut-off time set by the Auto Standby function comes earlier than the one set by the Sleep Timer, the Auto Standby function controls shut-off time.

19