Weed Eater 530088954, SST LE manual Cutting Safety, Transporting and Storage, Adjust the Handle

Page 3

SDo not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills.

SMove at least 10 feet (3 meters) away from fueling site before starting engine.

S Stop engine and allow to cool before removing fuel cap.

S Always store gasoline in a container approved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage trimmer head and be thrown causing serious injury.

S Use only for trimming, mowing, and sweeping. Do not use for edging, pruning, or hedge trimming.

S Keep firm footing and balance. Do not overreach.

S Keep all parts of your body away from spinning line and muffler. Keep engine below waist level. A hot muffler can cause serious burns.

SCutting with the line on left side of the shield will throw debris away from the operator.

SUse only in daylight or good artificial light.

TRANSPORTING AND STORAGE

S Allow the engine to cool; secure unit before storing or transporting in vehicle.

S Empty the fuel tank before storing or transporting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Store unit so line limiter blade cannot accidentally cause injury. Unit can be hung by the tube.

S Store the unit out of the reach of children.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the

requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your Authorized Service Dealer.

WARNING: Make sure your unit is properly assembled and all fasteners are secure.

ADJUST THE HANDLE

SLoosen wing nut on handle.

S Rotate handle to upright position and tighten in a comfortable position between the trigger and the safety label on the tube. Tighten handle securely.

ATTACH THE SHIELD

WARNING: The shield must be properly installed. The shield provides partial protection from the risk of thrown objects to the operator and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

SAssemble parts as shown; Tighten wing nut securely.

Shield

NOTE: Remove

Line Limiter

and use washer and

Blade

wing nut from this

Wing Nut

bolt for assembling

Washer

shield.

3

Image 3
Contents FeatherLitetSST LE For Occasional Use Only This power unit can be dangerous! Operator Operator SafetyUNIT/MAINTENANCE Safety Fuel SafetyAttach the Shield Cutting SafetyAdjust the Handle Transporting and StorageOperating Position HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineSpark Plug Carburetor AdjustmentsTroubleshooting Table Cause Remedy Ignition TimingPolicy of Electrolux Home Need Service Part?Replacement and Repair of Emission Related Parts Any

530088954, SST LE specifications

The Weed Eater SST LE is an innovative string trimmer designed for both residential and professional landscaping tasks. Renowned for its efficient performance and user-friendly features, this trimmer stands out in the market. One of its hallmark features is the lightweight design, which enhances maneuverability and reduces fatigue during extended use. Weighing in at a manageable level, operators can easily navigate various terrains without feeling burdened.

Equipped with a powerful electric motor, the SST LE delivers impressive cutting power without the noise and emissions associated with gas models. This electric motor not only promotes a greener approach to gardening but also minimizes maintenance needs. Users will appreciate the straightforward operation; simply plug it in and start trimming, which makes it ideal for quick tasks around the yard.

One of the standout characteristics of the SST LE is its automatic line feed system. This technology ensures a continuous supply of string during operation, eliminating the need for manual line adjustments. As a result, users can focus on their trimming without interruption, enhancing overall efficiency. The trimmer also features a dual-line cutting head, which effectively tackles thicker weeds and grass, ensuring a clean and professional finish.

The ergonomic design of the SST LE ensures comfort during use. It features an adjustable handle that accommodates various body types and gardening preferences, allowing for precise control and reducing strain. The trimmer's shaft is also customizable in length, making it suitable for users of different heights and ensuring optimal cutting angles.

Safety is another key component of the Weed Eater SST LE design. It incorporates a protective guard to shield users from debris while trimming, along with a lightweight build that minimizes the risk of accidents. This is particularly beneficial for those who may be newer to using power tools or have varying levels of experience.

In summary, the Weed Eater SST LE, model number 530088954, marries convenience, power, and safety. With its robust electric motor, automatic line feed technology, and ergonomic design, it provides users with a reliable tool for maintaining a well-groomed yard. Whether you are a weekend warrior or a professional landscaper, this trimmer offers the features and performance to meet diverse gardening needs. With the SST LE, users can confidently tackle their outdoor projects, achieving beautiful results with ease.