Weed Eater RT112, RT110 instruction manual Correct Operating Position, Advancing the Cutting Line

Page 6

CORRECT OPERATING POSITION

SCALPING

 

The scalping technique removes unwanted

 

vegetation down to the ground. Hold the bot-

 

tom of the trimmer head about 3 inches (8 cm)

 

above the ground and at an angle. Allow the

 

tip of the line to strike the ground around trees,

 

posts, monuments, etc. This technique in-

 

creases line wear.

Trimming

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing.

SHold trigger handle with right hand and as-

sist handle with left hand.

SKeep unit below waist level.

SCut only from your right to your left to en- sure debris is thrown away from you. With- out bending over, keep line near and paral- lel to the ground and not crowded into material being cut.

ADVANCING THE CUTTING LINE

Advance line by tapping bottom of cutting head lightly on the ground while unit is running at full speed. A metal line limiter blade at- tached to the shield will cut the line to the proper length.

WARNING: Use only 0.065 inch (1.65

mm)diameter line. Other sizes of line will not ad- vance properly and will result in improper cutting head function or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause se- rious injury. See page 2 for warning concerning other cutting devices.

TRIMMING

Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an an- gle. Allow only the tip of the line to make con- tact. Do not force trimmer line into work area.

Trimming

3 in. (8 cm) Above Ground

Scalping

MOWING

Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and dam- age the tool.

Mowing

SWEEPING

The fanning action of the rotating line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Advertencia AvertissementOperator Safety Electrical SafetyMaintenance Safety Unit SafetyCutting Safety Transporting and StorageInstallation of Assist Handle Align Installation ArrowsAttaching the Shield Operating Instructions Correct Operating Position Advancing the Cutting LineBefore Each USE After Each USETroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC

RT110, RT112 specifications

The Weed Eater RT112 and RT110 are two significant models in the realm of outdoor power equipment, specifically designed for homeowners and gardening enthusiasts. These string trimmers have gained a reputation for their reliability, performance, and ease of use, making them ideal for tackling lawn maintenance tasks with efficiency.

One of the standout features of the RT112 is its powerful engine. Equipped with a 25cc two-cycle engine, it provides the necessary power to handle tough grass and weeds. The RT110, while slightly less powerful, still boasts a robust 22cc engine that offers a perfect balance of performance and fuel efficiency for lighter tasks. Both models are designed for easy cold starting, allowing users to get to work quickly, even if the machine has been sitting for a while.

The line feed system is an essential characteristic of these trimmers. The RT112 and RT110 utilize a reliable, bump feed mechanism that allows users to easily advance the cutting line with a simple tap against the ground, making the trimming process more efficient and less interrupted. The cutting width of these models is around 16 inches, providing a perfect blend of productivity and maneuverability in tighter spaces.

Another notable technology in both the RT112 and RT110 is the lightweight design. Weighing less than 10 pounds, these trimmers are easy to handle and reduce user fatigue during extended periods of use. The ergonomic handle design improves comfort, while the adjustable shaft allows for customization to suit different user heights, enhancing overall ease of use.

Durability is another important feature of the RT112 and RT110. Constructed with high-quality materials, these trimmers are built to withstand the rigors of outdoor tasks. Additionally, the protective shield helps to deflect debris away from the user and the machine, ensuring safe operation.

The Weed Eater RT112 and RT110 are both designed with user convenience in mind. They feature easy-reach controls that allow for quick adjustments, making it simple to switch between various trimming tasks. Overall, the combination of power, comfort, and efficiency in these models makes them excellent choices for anyone looking to maintain their outdoor spaces effectively. Whether you're tackling tough weeds or simply shaping the edges of your lawn, the Weed Eater RT112 and RT110 deliver reliable performance for all your trimming needs.
Top Page Image Contents