Before Each USE, After Each USE | Weed Eater RT110, RT112 specification

WARNING: Disconnect unit from the power source before performing mainte- nance.

GENERALRECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

SHousing Screws S Assist Handle S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Trigger Switch -- Ensure switch functions properly by pressing and releasing the trig- ger switch. Make sure motor stops.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND LA- BELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit us- ing a damp cloth with a mild detergent.

S Wipe off unit with a clean dry cloth.

REPLACING THE LINE

1.Disconnect the unit from the power source.

2.Remove the spool by firmly pulling on the tap button.

3.Clean entire surface of hub and spool.

4.Replace with a pre-wound spool or cut a length of 30 feet of 0.065! (1.65 mm) di- ameter Weed Eaterr brand line. Use of heavier lines could overload and damage unit.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

5.Insert one end of the line about 1/2 inch (1 cm) into the small hole inside the spool.

6.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

7.Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

8.Insert the line into the exit hole in the hub as shown in the illustration.

9.Align the notch with the line exit hole.

10.Push the spool into the hub until it snaps into place.

11.Pull on the line extending outside the hub to release it from the notch; otherwise, the unit will not function properly.

Small

Hole

Spool

Tap

Button

Line in Notch

Hub	Line exit hole

USER REPLACEABLE SERVICE PARTS

REPLACEMENT PART	PART NUMBER
Spool with 0.065! Trimmer Line	952701663
Assist Handle	530403805
Bolt Carriage, 1/4-20	530403886
Wing Nut	530016152
Shield Assembly (RT110)	530404080
Shield Assembly (RT112)	530404076

RT110, RT112 specifications

The Weed Eater RT112 and RT110 are two significant models in the realm of outdoor power equipment, specifically designed for homeowners and gardening enthusiasts. These string trimmers have gained a reputation for their reliability, performance, and ease of use, making them ideal for tackling lawn maintenance tasks with efficiency.

One of the standout features of the RT112 is its powerful engine. Equipped with a 25cc two-cycle engine, it provides the necessary power to handle tough grass and weeds. The RT110, while slightly less powerful, still boasts a robust 22cc engine that offers a perfect balance of performance and fuel efficiency for lighter tasks. Both models are designed for easy cold starting, allowing users to get to work quickly, even if the machine has been sitting for a while.

The line feed system is an essential characteristic of these trimmers. The RT112 and RT110 utilize a reliable, bump feed mechanism that allows users to easily advance the cutting line with a simple tap against the ground, making the trimming process more efficient and less interrupted. The cutting width of these models is around 16 inches, providing a perfect blend of productivity and maneuverability in tighter spaces.

Another notable technology in both the RT112 and RT110 is the lightweight design. Weighing less than 10 pounds, these trimmers are easy to handle and reduce user fatigue during extended periods of use. The ergonomic handle design improves comfort, while the adjustable shaft allows for customization to suit different user heights, enhancing overall ease of use.

Durability is another important feature of the RT112 and RT110. Constructed with high-quality materials, these trimmers are built to withstand the rigors of outdoor tasks. Additionally, the protective shield helps to deflect debris away from the user and the machine, ensuring safe operation.

The Weed Eater RT112 and RT110 are both designed with user convenience in mind. They feature easy-reach controls that allow for quick adjustments, making it simple to switch between various trimming tasks. Overall, the combination of power, comfort, and efficiency in these models makes them excellent choices for anyone looking to maintain their outdoor spaces effectively. Whether you're tackling tough weeds or simply shaping the edges of your lawn, the Weed Eater RT112 and RT110 deliver reliable performance for all your trimming needs.