Configuration for Wired Operation

SMC Networks SMCWMR-AG manual Configuration for Wired Operation

English

c)[Encryption enabled?]: Select [Off] if you are not using encryption on your wireless network and go to Step 4e. Select [Hex Digits] to enter your appropriate encryption key.

d)If you selected [Hex Digits] in Step 4c, you will be asked to input the WEP key of your wireless network. Use the Up/Down arrows on your Remote Control to choose the appropriate letters. Use the Left/Right arrows to skip to the next letter of the SSID. Press [OK] on your Remote Control when finished.

e)[Network Type]: Select [Infrastructure] if you are using an Access Point or a Wireless Router to connect your SMCWMR-AG to your wireless network. Select [Peer to Peer] if you have an Ad-hoc wireless network.

f)[DHCP server present?]: Select [Yes] if you have a DHCP server on your network that will allow the SMCWMR-AG to obtain an IP address automatically. If you do not have a DHCP server on your network, select [No] and input your IP, Subnet Mask, and Gateway addresses.

g)[Is proxy present?]: Select [No] and press [OK] on your

remote to continue. (Note: The majority of home networks use a standard Broadband Router to share internet access. In this configuration, there is no proxy present.) Some corporate networks may have proxies in place for advanced security. To configure this setting, simply obtain the proxy IP address and port from your Network Administrator and then input this data via your Remote Control.

h)You have now completed the initial configuration.

You will be asked to confirm the changes by pressing [OK] to continue. The SMCWMR-AG will reset and automatically connect to your network upon boot-up.

i)Once the SMCWMR-AG is connected, it will ask you to [Register Now]. This will give you the option to upgrade your firmware via Smart Box Management to take advantage of new updates. (Note: You can register at any point by going to the [Settings] menu.)

Note: You will need your SMCWMR-AG Universal Wireless Multimedia Receiver Remote Control if you wish to make changes to the default settings.

Step 1: Turn on the SMCWMR-AG. By default, the SMCWMR-AG Universal Wireless Multimedia Receiver will be configured to connect to your SMC2804WBR Barricade g 2.4GHz 54Mbps Wireless Broadband Router and SMC2304WBR-AG EZ-Stream Universal Wireless Broadband Router. The default settings are as follows:

•SSID: [SMC]

•WEP: [Disabled]

•Internet Proxy: [Disabled]

•IP Address: 192.168.2.45 (DHCP Disabled)

•Mode: [Infrastructure]

Step 2: If your network is not configured as specified in Step 1, you will need to configure the SMCWMR-AG to properly establish a connection to your wired network.

Step 3: The SMCWMR-AG will automatically ask you to reconfigure your settings if it was not able to get connected with the default settings.

Step 4: Please answer the on-screen questions to complete the setup.

a)[Network Interface]: Select [Use Wired (Ethernet)] to use a wired network. Remember, to make a selection, press the [OK] button on your remote control.

b)[DHCP server present?]: Select [Yes] if you have

a DHCP server on your network that will allow the SMCWMR-AG to obtain an IP address automatically. If you do not have a DHCP server on your network, select [No] and input your IP, Subnet Mask, and Gateway addresses.

English

SMCWMR-AG specifications

SMC Networks SMCWMR-AG is a versatile wireless router that caters to the expanding needs of home and small business networks. Designed for both ease of use and connectivity, the SMCWMR-AG incorporates advanced technologies that enhance performance and reliability.

One of the standout features of the SMCWMR-AG is its dual-band capability. This device operates on both the 2.4GHz and 5GHz frequency bands, allowing users to choose the best band that suits their usage. The 2.4GHz band offers extended range and better penetration through walls, making it ideal for general browsing and social media. On the other hand, the 5GHz band provides higher speeds and less interference, perfect for activities such as streaming HD video, online gaming, and large file transfers.

The router supports the IEEE 802.11a/b/g/n standards, ensuring compatibility with a vast range of devices. With a maximum wireless data rate of up to 300 Mbps on the 2.4GHz band and 150 Mbps on the 5GHz band, users can enjoy robust connections that support multiple devices simultaneously without significant lag.

In terms of security, the SMCWMR-AG employs WPA/WPA2 encryption protocols, which protect the network from unauthorized access and potential breaches. Additionally, it features a built-in firewall for an added layer of defense against external threats, making the network safer for all connected devices.

The SMCWMR-AG also includes multiple Ethernet ports for wired connections. This feature is particularly useful for devices that require stable and fast internet connections, such as gaming consoles, desktop computers, and smart TVs. The ability to connect both wired and wireless devices makes it a flexible choice for various networking needs.

Setting up the SMCWMR-AG is relatively straightforward, thanks to its user-friendly web interface. Users can quickly configure settings, manage connected devices, and monitor network performance. Furthermore, the device supports Quality of Service (QoS), allowing prioritization of bandwidth for specific applications or devices, which enhances the overall user experience.

In summary, the SMC Networks SMCWMR-AG is a feature-rich wireless router designed to meet the demands of modern internet usage. Its dual-band capabilities, robust security features, and ease of use make it a suitable choice for both casual users and tech-savvy individuals. Whether for browsing, streaming, or gaming, the SMCWMR-AG delivers a reliable and efficient networking solution.