Weed Eater 530086828 Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts

Page 11

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to

the OFF position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel

tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND DE- CALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air filter

Screws

Air filter cover

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by your authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 in. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 in. socket wrench.

4.Reinstall the spark plug boot.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual de Instrucciones Manuel d’Instructions Always Wear Operator SafetyTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAssembly Information Trimmer Head Carton ContentsAssembly of Shoulder Strap Configuring Your UnitWeed Blade Assembly Information Weed BladeAttaching the Plastic Shield and Trimmer Head Attaching the Metal ShieldInstallation of the Metal Blade Primer Bulb ON/OFF SwitchHOW to Stop Your Unit Know Your BrushwackerOperating Position HOW to Start Your UnitStarting a Warm Engine Starting a Flooded EngineCutting Methods Operating Instructions for USE with Trimmer HeadTrimmer Line Advance Recommended Cutting Position Operating Instructions for USE with Weed BladeCheck for Damaged or Worn Parts Inspect and Clean Unit and DE- CalsClean AIR Filter Check for Loose Fasteners and PartsSeasonal Storage Blade ReplacementCarburetor Adjustment Replacing the LineTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC POULAN/WEED Eater Warranty Period

530086828, BC2500 LE specifications

The Weed Eater 530086828, BC2500 LE is a robust and efficient tool designed for homeowners and gardening enthusiasts looking to maintain their outdoor spaces with ease. This gas-powered string trimmer features a powerful 25cc two-stroke engine, which provides ample power while being lightweight and maneuverable. With its user-friendly design, the BC2500 LE is suitable for a variety of cutting tasks, from trimming grass and weeds to edging along sidewalks and garden beds.

One of the standout features of the Weed Eater BC2500 LE is its Easy Start technology. This innovative system reduces the amount of pulling force required to start the engine, allowing users to get to work quickly without the hassle of a difficult startup process. The trimmer also boasts an adjustable speed throttle that lets users control the cutting power according to the task at hand, whether they are tackling tougher weeds or performing more delicate trimming.

The design of the BC2500 LE includes a 17-inch cutting swath, which allows for efficient coverage of larger areas while still being precise enough for detailed work. This trimmer is equipped with a dual-line bump feed head, enabling users to seamlessly extend the cutting line as needed by simply tapping the trimmer head on the ground. This feature eliminates interruptions during operation, allowing for a smooth and continuous cutting experience.

Adding to its versatility, the BC2500 LE features an ergonomic handle that reduces fatigue during extended use. The lightweight design, coupled with a balanced frame, helps users navigate around obstacles without straining their muscles. Additionally, the trimmer includes a protective shield that keeps debris at bay, ensuring a safer operation.

Another noteworthy characteristic is the durable construction of the Weed Eater BC2500 LE. Built with high-quality materials, it is designed to withstand the rigors of regular use while maintaining performance over time. The trimmer also features an easy-access air filter, which simplifies maintenance and ensures optimal engine performance.

Overall, the Weed Eater 530086828, BC2500 LE is a reliable and efficient tool that combines power, comfort, and ease of use. Its features cater to a wide range of landscaping needs, making it an excellent choice for both novice users and experienced gardeners alike. Whether you need to maintain a tidy yard or tackle overgrown areas, the BC2500 LE stands ready to take on the challenge with reliability and efficiency.
Top Page Image Contents