UNIT/MAINTENANCE Safety, Fuel Safety | Weed Eater 530086828 specs

SKeep handles free of oil and fuel.

S Always use the handlebar and a properly adjusted shoulder strap with a blade (see ASSEMBLY).

UNIT/MAINTENANCE SAFETY

WARNING: Stop unit and disconnect the spark plug before performing mainte- nance (except carburetor adjustments).

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep unit in good working condition.

SThrow away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace trimmer head parts that are cracked, chipped, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep blade sharp. Keep cut- ting line at the proper length.

S Use only 0.080! (2 mm) diameter Weed Eater∀ brand replacement line. Never use wire, rope, string, etc.

SInstall required shield properly before using the unit. Use the metal shield for all metal blade use. Use the plastic shield for all line

trimmer use.

SUse only specified blade or trimmer head;

make sure it is properly installed and se- curely fastened.

S Never start engine with clutch shroud re- moved. The clutch can fly off and cause se- rious injury.

SBe sure blade or trimmer head stops turning

when engine idles.

SMake carburetor adjustments with the low- er end supported to prevent blade or trim- mer line from contacting any object. Hold unit by hand; do not use the shoulder strap for support.

SKeep others away when making carburetor

adjustments.

SUse only recommended Weed Eaterr ac- cessories and replacement parts.

SHave all maintenance and service not ex- plained in this manual performed by your authorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit or while using the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills before starting engine.

S Move at least 10 feet (3 meters) away from the fueling site before starting engine.

S Stop engine and allow it to cool before re- moving fuel cap.

S Empty the fuel tank before storing or trans- porting the unit. Use up fuel left in the car- buretor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Always store gasoline in a container ap- proved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area to be cut before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in the blade or trimmer head.

S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Stop engine immediately if you are approached.

SAlways keep engine on the right--hand side of your body.

SHold the unit firmly with both hands.

S Keep firm footing and balance. Do not overreach.

SKeep blade or trimmer head below waist level. Do not raise engine above your waist.

S Keep all parts of your body away from blade, trimmer head, and muffler when en- gine is running. Keep all of your body away from the muffler when it is hot. A hot muffler can cause serious burns.

SCut from your left to your right. Cutting on

right side of the shield will throw debris away from the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

SStop the unit before carrying.

SKeep muffer away from your body.

SAllow the engine to cool and secure the unit

before storing or transporting it in a vehicle.

SEmpty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carbu- retor by starting the engine and letting it run

until it stops.

SStore unit so the blade or line limiter blade cannot accidentally cause injury. The unit can be hung by the tube.

SStore unit out of reach of children. SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or ab- normal swellings. Prolonged use in cold weather has been linked to blood vessel dam- age in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek med- ical attention. An anti--vibration system does not guarantee the avoidance of these prob- lems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi- tion of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be

530086828, BC2500 LE specifications

The Weed Eater 530086828, BC2500 LE is a robust and efficient tool designed for homeowners and gardening enthusiasts looking to maintain their outdoor spaces with ease. This gas-powered string trimmer features a powerful 25cc two-stroke engine, which provides ample power while being lightweight and maneuverable. With its user-friendly design, the BC2500 LE is suitable for a variety of cutting tasks, from trimming grass and weeds to edging along sidewalks and garden beds.

One of the standout features of the Weed Eater BC2500 LE is its Easy Start technology. This innovative system reduces the amount of pulling force required to start the engine, allowing users to get to work quickly without the hassle of a difficult startup process. The trimmer also boasts an adjustable speed throttle that lets users control the cutting power according to the task at hand, whether they are tackling tougher weeds or performing more delicate trimming.

The design of the BC2500 LE includes a 17-inch cutting swath, which allows for efficient coverage of larger areas while still being precise enough for detailed work. This trimmer is equipped with a dual-line bump feed head, enabling users to seamlessly extend the cutting line as needed by simply tapping the trimmer head on the ground. This feature eliminates interruptions during operation, allowing for a smooth and continuous cutting experience.

Adding to its versatility, the BC2500 LE features an ergonomic handle that reduces fatigue during extended use. The lightweight design, coupled with a balanced frame, helps users navigate around obstacles without straining their muscles. Additionally, the trimmer includes a protective shield that keeps debris at bay, ensuring a safer operation.

Another noteworthy characteristic is the durable construction of the Weed Eater BC2500 LE. Built with high-quality materials, it is designed to withstand the rigors of regular use while maintaining performance over time. The trimmer also features an easy-access air filter, which simplifies maintenance and ensures optimal engine performance.

Overall, the Weed Eater 530086828, BC2500 LE is a reliable and efficient tool that combines power, comfort, and ease of use. Its features cater to a wide range of landscaping needs, making it an excellent choice for both novice users and experienced gardeners alike. Whether you need to maintain a tidy yard or tackle overgrown areas, the BC2500 LE stands ready to take on the challenge with reliability and efficiency.