Assembly

operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service.

After 50 hours of use, we recommend that your muffler be serviced or replaced by your authorized service dealer.

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

CARTON CONTENTS

Check carton contents against the following list:

SBrushcutter

SHandlebar screws (2) S Blade shield screws (4) S Cupped washer

S Large nut for installing blade S Hex wrench

S Bracket cover S Metal shield S Plastic shield

S Shoulder strap with warning S 4--point weed blade

S Trimmer head (assembled on unit) S Handlebar

S Wing nut (screwed onto shield) S Container of oil

WARNING: Always stop unit and dis- connect spark plug before performing any as- sembly procedures.

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

TOOLS REQUIRED

SHex wrench (provided)

SAdjustable wrench or large pliers S Phillips screwdriver

ATTACHING THE HANDLEBAR

WARNING: During blade usage, the barrier portion of the handlebar must be installed as shown to provide a barrier be- tween operator and the spinning blade.

1.Locate the decal on the handlebar. This decal includes an arrow. Position the handlebar with the mounting bracket at the end of the arrow.

2.Position the bracket cover over the han- dlebar. Again make sure the handlebar is at the end of the arrow.

3.Insert screws and hand tighten only. Be sure the handlebar is installed correctly; then, tighten each screw securely with the hex wrench.

Handlebar Screw

Bracket Cover

Mounting

Bracket

ASSEMBLY OF SHOULDER STRAP

WARNING: Proper shoulder strap and handlebar adjustments must be made with the engine completely stopped before using unit.

1. Insert your right arm and head through

the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign is on your back and the hook is to the right side of your waist.

NOTE: A one-half twist is built in the shoul- der strap to allow the strap to rest flat on the shoulder.

2. Adjust the strap, allowing the hook to be about 6 inches below the waist.

3. Fasten the strap hook to the clamp located between the trigger handle and the handle- bar clamp base and lift the tool to the oper- ating position.

4. Try on shoulder strap and adjust for fit and balance before starting the engine or beginning a cutting operation.

NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for proper balancing of unit.

TO RELOCATE SHOULDER STRAP CLAMP:

1.Loosen and remove both clamp screws.

2.Place the upper shoulder strap clamp over the tube.

3.Position the lower shoulder strap clamp under the tube and align the upper and lower clamp screw holes.

Upper Shoulder

Strap Clamp

Lower Shoulder
Strap Clamp	Screws
	Screws

530164314 specifications

The Weed Eater 530164314 is a powerful and reliable string trimmer designed to make yard maintenance easier and more efficient. Engineered for both residential and light commercial use, this model stands out due to its combination of innovative features, user-friendly design, and robust performance.

One of the main features of the Weed Eater 530164314 is its lightweight and ergonomic design, which allows for comfortable handling during extended use. Weighing in at a manageable level, users can easily maneuver around shrubs, flower beds, and other landscaping obstacles without experiencing undue fatigue. The adjustable handle further enhances comfort, allowing users of different heights to maintain a natural grip while working.

The trimmer is equipped with a powerful engine that delivers impressive cutting power. This engine allows the Weed Eater to tackle dense grass, weeds, and overgrown vegetation with ease. Not only does it provide efficiency, but it also ensures that users can complete their tasks in a timely manner, ultimately saving both time and effort.

Another key characteristic of the Weed Eater 530164314 is its innovative dual-line cutting system. This feature allows for a wider cutting path than traditional single-line models, significantly increasing trimming efficiency. As the trimmer rotates, the two lines efficiently slice through grass and weeds, providing a clean and thorough cut while minimizing the need for multiple passes.

The automatic feed spool is another vital technology integrated into this trimmer. This system automatically feeds the cutting line as needed, eliminating the hassle of stopping work to manually adjust the line. Users can work continuously and focus on the task at hand, resulting in increased productivity.

Durability is also a highlight of the Weed Eater 530164314, with a sturdy construction designed to withstand the rigors of outdoor use. The robust materials used in its construction ensure that it remains functional and reliable over time, making it a worthwhile investment for homeowners and landscape professionals alike.

In conclusion, the Weed Eater 530164314 is a string trimmer that excels in design, performance, and ease of use. Its lightweight build, powerful engine, dual-line cutting system, automatic feed spool, and durable construction make it a top choice for anyone seeking an efficient and effective solution for maintaining their outdoor spaces. Whether you’re tackling a small garden or a larger lot, the Weed Eater 530164314 is equipped to handle various landscaping challenges.