Maintenance, Service and Adjustments | Weed Eater 952711894 guide

MAINTENANCE

WARNING: Disconnect unit from power source before performing mainte- nance.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

SHousing Screws S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Trigger Switch -- Ensure switch functions properly by pressing and releasing the trig- ger switch. Make sure motor stops.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND LA- BELS

SAfter each use, inspect complete unit for loose or damaged parts. Never use a dam-

aged trimmer.

SClean the unit using a damp cloth with a

mild detergent.

SWipe off unit with a clean dry cloth.

SUse a soft brush to clean around the inside of the debris shield, the cutting head and the motor housing air vents.

SERVICE AND ADJUSTMENTS

WARNING: Disconnect unit from power source before servicing.

REPLACING THE LINE

1.Press and hold in the two cap release latches.

2.Pull cap away from the hub.

		Cap
		Cap
	Spool	release
	Spool	latch
		latch

Hub

Eyelet

3.Remove old spool.

4.Clean entire surface of hub and spool.

5.Replace with a pre--wound spool or cut two lengths of 13 feet (4 meters) of 0.065″ (1.65 mm) diameter WEED EATER brand line. Use of heavier lines could overload and damage unit.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

6.Insert one end of the line about 1/2 inch (1 cm) into one of the small holes in the up- per section of the inside of the spool.

7.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

8.Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

9.Repeat on the lower section of the spool.

Notches

952711894 specifications

The Weed Eater 952711894 is a versatile and powerful string trimmer designed for both residential and commercial use. With its focus on performance, ease of use, and durability, this tool has become a favorite among landscapers and homeowners alike.

One of the standout features of the Weed Eater 952711894 is its lightweight design. Weighing in at just under 10 pounds, this trimmer is easy to maneuver, reducing user fatigue during extended use. The ergonomic handle provides a comfortable grip, enabling precise control for trimming around delicate flower beds, fences, and other obstacles.

Powering the Weed Eater 952711894 is a robust 25cc 2-stroke engine. This engine delivers reliable performance, making light work of tough weeds and thick grass. The easy-start technology ensures that users can quickly start the trimmer without any hassle, enhancing overall productivity.

The trimmer is equipped with a dual-line bump head, allowing for quick and easy line replacement. This feature not only saves time but also ensures that users can maintain cutting efficiency throughout their trimming tasks. The dual lines provide a wider cutting path, further enhancing productivity and allowing for faster work completion in larger areas.

Another notable characteristic of the Weed Eater 952711894 is its adjustable telescoping shaft. This feature allows users to customize the trimmer's length to their preference, making it suitable for users of varying heights. The adjustable shaft also aids in reaching tight spaces and difficult angles, enhancing overall versatility.

For added convenience, the Weed Eater 952711894 includes a protective guard that helps to shield the user from debris while trimming. This feature promotes safer operation by minimizing the risk of injury from flying grass clippings and other materials.

In terms of maintenance, the trimmer is designed for easy access to the engine and other components, simplifying routine care and upkeep. Users can quickly check and replace the spark plug, air filter, and fuel lines, ensuring that the trimmer operates at peak performance throughout its lifespan.

Overall, the Weed Eater 952711894 combines power, efficiency, and user-friendly features. Whether tackling a small residential lawn or managing a larger landscaped area, this trimmer is equipped to deliver excellent results, making it a worthy addition to any gardening toolkit.