Weed Eater 952711866 Troubleshooting Table, Electrical failure, Incorrect line size

Page 9

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect from the power source before per-

forming all of the recommended remedies below except remedies that require unit to be operating.

TROUBLE

CAUSE

REMEDY

Trimmer head

1. Crowding trimmer line

1.

Allow tip of line to do the cutting.

stops under a

 

against material being

 

 

load or does not

 

cut.

2.

Contact your authorized service dealer.

turn when switch

2. Electrical failure.

is pressed.

3. Thrown circuit breaker.

3.

Check breaker box.

 

4. Debris stopping head.

4.

Remove debris.

Line does not

1.

Line improperly routed

1.

Check line routing.

advance or

 

in head.

 

 

breaks while

2.

Line improperly

2.

Rewind line tightly and evenly.

cutting.

 

wound into spool.

3.

Use only 0.065 inch (1.65 mm) dia. line.

 

3.

Incorrect line size

 

4.

Not enough line

4.

Remove cover and pull 4 inches

 

 

outside of head.

 

(10 cm) of line out of head.

 

5.

Dirt buildup on unit.

5.

Clean unit.

Line welds onto

1.

Line size is incorrect.

1. Use only 0.065 inch (1.65 mm) dia. line.

spool.

2.

Incorrect spool.

2. Replace with correct spool.

 

3.

Line is being crowded

3. Cut with tip of line fully extended.

 

 

against material being

 

 

 

 

cut.

 

 

Line releases

1.

Line improperly

1. Check line routing.

continuously.

 

routed in head.

 

 

 

2.

Spool damaged.

2. Replace spool.

Line usage is

1. Line improperly routed

1.

Check line routing.

excessive.

 

in head.

2.

Replace spool.

 

2. Line size is incorrect.

 

3. Crowding line against

3.

Cut with tip of line fully extended.

 

 

material being cut.

4.

Replace spool.

 

4. Spool worn or damaged.

Line pulls back

1. Too little line outside

1. Remove cover and pull 4 inches

into head.

 

of head.

 

(10 cm) of line outside of head.

 

2. Line size incorrect.

2. Use only 0.065 inch (1.65 mm) dia. line.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Avertissement AdvertenciaSafety Rules Operator SafetyElectrical Safety Cutting Safety Unit SafetyMaintenance Safety Transporting and StorageTube Assembly AssemblyAdjusting Assist Handle Attaching Edge Guide and ShieldOperation Select AN Extension Cord Operating InstructionsAttach the Extension Cord to Your Trimmer Correct Operating PositionService and Adjustments MaintenanceBefore Each USE After Each USEInstalling Spool with Line User Replaceable Service PartsRefilling the Spool with Line Troubleshooting Table Electrical failureIncorrect line size Husqvarna Outdoor Products Inc Statesville Road Canada, contactWeed Eater

952711866 specifications

The Weed Eater 952711866 is a reliable and efficient string trimmer designed to make lawn care easier for homeowners and landscapers alike. This trimmer is especially suited for those looking for a perfect blend of power, convenience, and maneuverability. The lightweight design and user-friendly features make it an ideal choice for both novice and experienced users.

One of the standout features of the Weed Eater 952711866 is its powerful engine, which provides ample power for cutting through tough grasses and weeds. The trimmer is equipped with a 25cc two-cycle engine, which delivers a strong performance while ensuring that the tool remains lightweight and easy to handle. This engine technology provides a balance of power and efficiency, allowing users to complete their tasks with minimal effort.

The design of the Weed Eater 952711866 emphasizes comfort and ease of use. It features an ergonomic grip and an adjustable handle that offer a comfortable hold during operation. The trimmer is engineered to reduce vibrations, minimizing fatigue during extended use. This thoughtful design allows users to maintain better control, ensuring more precise cutting and trimming.

A notable characteristic of the Weed Eater 952711866 is its ease of string loading. The innovative bump-feed system allows users to quickly and easily advance the cutting line with a simple bump of the trimmer head on the ground. This feature saves time and eliminates the frustration of dealing with complicated string reloading processes.

Additionally, the Weed Eater 952711866 comes equipped with a 16-inch cutting width, enabling it to tackle larger areas efficiently. This wide cutting path helps reduce mowing time, making it a valuable tool for maintaining expansive lawns or gardens. The dual-line cutting system enhances performance, providing a cleaner cut and allowing for faster trimming of thicker grass.

The lightweight construction further adds to its usability, making it easy to maneuver around flower beds, tight corners, and uneven terrain. This makes it an excellent choice for detailed trimming and edging.

Overall, the Weed Eater 952711866 is a powerful and versatile string trimmer that combines advanced technology with user-friendly features. Whether you're a homeowner looking to keep your lawn neat or a professional landscaper seeking an efficient tool, this trimmer is designed to deliver excellent results while ensuring comfort and ease of operation. Its robust engine, user-friendly design, and practical features make it a valuable asset for any lawn care arsenal.
Top Page Image Contents