Weed Eater 952711866 Maintenance, Service and Adjustments, Before Each USE, After Each USE

Page 7

Scalping

MOWING

Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and dam- age the tool.

Mowing

SWEEPING

The fanning action of the rotating line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect power source before performing maintenance.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

SHousing Screws

SLocking Sleeve Assembly S Assist Handle

S Debris Shield S Edge Guide

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

STrigger Switch -- Ensure switch functions properly by pressing and releasing the trig-

ger switch. Make sure motor stops.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND DE- CALS

SAfter each use, inspect complete unit for

loose or damaged parts. Clean the unit us- ing a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

SRemove line guide ring and spool.

Pre--wound spools offer the most convenient method for replacing line and ensuring opti- mum performance.

SReplacement spools are color--coded to ensure use of the correct spool with your unit. Be sure to use the same color spool as

the existing spool.

NOTE: Always clear dirt and debris from cut- ting head components when performing any

Cap

Line guide ring

Spool

type of maintenance.

SHold spool and unscrew cap by turning in the direction shown on top of the cap.

Use a pre--wound spool or refill spool with line. If using a pre--wound spool, remove tape strip from line and spool.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Avertissement AdvertenciaOperator Safety Safety RulesElectrical Safety Transporting and Storage Unit SafetyCutting Safety Maintenance SafetyAttaching Edge Guide and Shield AssemblyTube Assembly Adjusting Assist HandleOperation Correct Operating Position Operating InstructionsSelect AN Extension Cord Attach the Extension Cord to Your TrimmerAfter Each USE MaintenanceService and Adjustments Before Each USEUser Replaceable Service Parts Installing Spool with LineRefilling the Spool with Line Electrical failure Troubleshooting TableIncorrect line size Canada, contact Husqvarna Outdoor Products Inc Statesville RoadWeed Eater

952711866 specifications

The Weed Eater 952711866 is a reliable and efficient string trimmer designed to make lawn care easier for homeowners and landscapers alike. This trimmer is especially suited for those looking for a perfect blend of power, convenience, and maneuverability. The lightweight design and user-friendly features make it an ideal choice for both novice and experienced users.

One of the standout features of the Weed Eater 952711866 is its powerful engine, which provides ample power for cutting through tough grasses and weeds. The trimmer is equipped with a 25cc two-cycle engine, which delivers a strong performance while ensuring that the tool remains lightweight and easy to handle. This engine technology provides a balance of power and efficiency, allowing users to complete their tasks with minimal effort.

The design of the Weed Eater 952711866 emphasizes comfort and ease of use. It features an ergonomic grip and an adjustable handle that offer a comfortable hold during operation. The trimmer is engineered to reduce vibrations, minimizing fatigue during extended use. This thoughtful design allows users to maintain better control, ensuring more precise cutting and trimming.

A notable characteristic of the Weed Eater 952711866 is its ease of string loading. The innovative bump-feed system allows users to quickly and easily advance the cutting line with a simple bump of the trimmer head on the ground. This feature saves time and eliminates the frustration of dealing with complicated string reloading processes.

Additionally, the Weed Eater 952711866 comes equipped with a 16-inch cutting width, enabling it to tackle larger areas efficiently. This wide cutting path helps reduce mowing time, making it a valuable tool for maintaining expansive lawns or gardens. The dual-line cutting system enhances performance, providing a cleaner cut and allowing for faster trimming of thicker grass.

The lightweight construction further adds to its usability, making it easy to maneuver around flower beds, tight corners, and uneven terrain. This makes it an excellent choice for detailed trimming and edging.

Overall, the Weed Eater 952711866 is a powerful and versatile string trimmer that combines advanced technology with user-friendly features. Whether you're a homeowner looking to keep your lawn neat or a professional landscaper seeking an efficient tool, this trimmer is designed to deliver excellent results while ensuring comfort and ease of operation. Its robust engine, user-friendly design, and practical features make it a valuable asset for any lawn care arsenal.
Top Page Image Contents