Tube Assembly, Adjusting Assist Handle

ASSEMBLY

WARNING: If received assembled, review all assembly steps to ensure your unit is properly assembled and all fasteners are secure.

TUBE ASSEMBLY

Upper Locking Sleeve Assembly

Wires

Lower Locking Sleeve Assembly

1.Align upper tube groove with triangle on lower locking sleeve assembly. Push tubes together until they snap into place.

Upper Tube

Groove

Alignment Triangle

2.Try to pull tubes back apart. If the tubes do not come apart, they are properly snapped into place. If the tubes come apart, repeat step 1 and push until the tubes snap into place.

3.Slide upper locking sleeve assembly over lower locking sleeve assembly and tight- en by turning clockwise.

4.Ensure locking sleeve assembly and alignment decals appear as illustrated be- low.

Alignment decals

WARNING: Failure to completely en- close excess wires in upper tube during assem- bly of the unit may result in damage to the wires and/or the unit or serious injury to the operator including electrocution.

WARNING: The upper and lower tubes must be snapped together, remain per- manently assembled together and the locking sleeve assembly must be fully tightened be- fore and during use to avoid serious injury to the operator and/or damage to the unit. DO NOT attempt to disassemble unit after initial assembly.

ADJUSTING ASSIST HANDLE

1.Loosen and remove wing nut and bolt from assist handle.

2.Place unit on a flat surface.

3.Firmly push the assist handle over the tube. To make installation easier, tilt han- dle toward trigger housing while pushing down (see illustration).

4.Reinstall bolt in handle. Thread wing nut onto bolt.

5.Adjust the handle up or down the tube to a comfortable position; tighten wing nut se- curely.

Assist handle

Trigger housing

Tube

ATTACHING EDGE GUIDE AND SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion to the operator and others from the risk of thrown objects. Your unit is equipped with a line limiter blade, which cuts excess line to the prop- er length while running. The line limiter blade (on underside of shield) is sharp and can cut you. NOTE: If shield is not properly installed, dam- age to unit (including motor failure) will result.

1.Insert edge guide into two holes in shield. NOTE: Edge guide must be positioned on shield prior to installation on motor housing (see following illustration).

Edge Guide

Front

Locking

Tab

Rear Locking

Tabs

Shield

2.Place shield over cutting head at an angle to the motor housing. Insert front locking tab on shield into opening in front of motor housing.

952711866 specifications

The Weed Eater 952711866 is a reliable and efficient string trimmer designed to make lawn care easier for homeowners and landscapers alike. This trimmer is especially suited for those looking for a perfect blend of power, convenience, and maneuverability. The lightweight design and user-friendly features make it an ideal choice for both novice and experienced users.

One of the standout features of the Weed Eater 952711866 is its powerful engine, which provides ample power for cutting through tough grasses and weeds. The trimmer is equipped with a 25cc two-cycle engine, which delivers a strong performance while ensuring that the tool remains lightweight and easy to handle. This engine technology provides a balance of power and efficiency, allowing users to complete their tasks with minimal effort.

The design of the Weed Eater 952711866 emphasizes comfort and ease of use. It features an ergonomic grip and an adjustable handle that offer a comfortable hold during operation. The trimmer is engineered to reduce vibrations, minimizing fatigue during extended use. This thoughtful design allows users to maintain better control, ensuring more precise cutting and trimming.

A notable characteristic of the Weed Eater 952711866 is its ease of string loading. The innovative bump-feed system allows users to quickly and easily advance the cutting line with a simple bump of the trimmer head on the ground. This feature saves time and eliminates the frustration of dealing with complicated string reloading processes.

Additionally, the Weed Eater 952711866 comes equipped with a 16-inch cutting width, enabling it to tackle larger areas efficiently. This wide cutting path helps reduce mowing time, making it a valuable tool for maintaining expansive lawns or gardens. The dual-line cutting system enhances performance, providing a cleaner cut and allowing for faster trimming of thicker grass.

The lightweight construction further adds to its usability, making it easy to maneuver around flower beds, tight corners, and uneven terrain. This makes it an excellent choice for detailed trimming and edging.

Overall, the Weed Eater 952711866 is a powerful and versatile string trimmer that combines advanced technology with user-friendly features. Whether you're a homeowner looking to keep your lawn neat or a professional landscaper seeking an efficient tool, this trimmer is designed to deliver excellent results while ensuring comfort and ease of operation. Its robust engine, user-friendly design, and practical features make it a valuable asset for any lawn care arsenal.