Chapter 3
Maintenance and Specifications
Introduction
This chapter covers the appropriate methods for maintaining and the technical specifications for the scanner.
Maintenance
Cleaning the exit window is the only maintenance required. A dirty window may affect scanning accuracy.
tDo not allow any abrasive material to touch the window.
tRemove any dirt particles with a damp cloth.
tWipe the window using a tissue moistened with ammonia/water.
tDo not spray water or other cleaning liquids directly into the window.
tDo not remove the nose of the scanner.
Troubleshooting
If, after following the operating instructions, the scanner does not work:
tCheck the system power.
tMake sure the controller is programmed to decode bar codes of the symbology you are scanning.
tCheck for loose cable connections.
