Makita G12010R manual HOW-TO Maintenance, Engine OIL Change, Engine OIL Filter Replacement, － 26－

Page 37

9. "HOW-TO" MAINTENANCE

ENGINE OIL CHANGE

■Initial oil change

・・・・・After 20 hours of operation

■Thereafter

・・・・・Every 100 hours of operation

1.When changing oil, stop the engine and loosen the drain plug.

2.Re-install the drain plug before refilling oil.

3.Refer to the recommended oil table on page 6.

4.Always use the best grade and clean oil. Contaminated oil, poor quality oil and shortage of oil cause damage to engine or shorten the engine life.

Oil capacity ・・・・・0.41 US-gal (Upper level)

1.55 liters (Upper level)

OIL DRAIN PLUG

(ON BOTH SIDE)

OIL FILLER CAP

ENGINE OIL FILTER

REPLACEMENT

■Initial engine oil filter replacement should be performed after 20 hours of operation. Thereafter replace the engine oil filter every 200 hours.

■When installing a new oil filter, apply oil to O-ring, attach the oil filter in position and tighten 2/3 turns by hand or with wrench after touching the O-ring to the sealing surface of engine.

■Run the engine for a minute ; stop the engine and check for oil leakage around the oil filter and recheck the oil level.

OIL FILTER

CAUTION

To prevent injury, pay attention to the spilled hot engine oil when replacing engine oil filter.

－ 26－

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Generator AIR Index Emission Component Defect Warranty Period Federal Emissions Component Defect WarrantyObtaining Warranty Service What is not CoveredHOW to Make a Claim Owners Warranty ResponsibilitiesYour Warranty Rights and Obligations California Emission Control Warranty StatementManufacturers Warranty Coverage What is Covered Under this Warranty Warranty PeriodEMISSION-RELATED Parts Covered Under this Warranty Maintenance Schedule What is not Covered Under this WarrantyHOW to File a Warranty Claim Where to GET Warranty Services Repair and Replacement of EMISSION-RELATED Parts［CAUTION］ ForewordBe sure to replenish with engine oil See page 6 for details Contents － 1－ Safety Precautions－ 2－ － 3－ － 4－ Specifications－ 5－ ComponentsCheck Engine OIL PRE-OPERATION Check－ 6－ － 7－ Check Engine FuelRecommended Battery Battery Installation－ 9－ Check Generator Surroundings Check Component Parts－ 10－ Starting the Engine Operating ProceduresSwitch Using Electric Power－ 12－ Idle Control－ 13－ AC ApplicationStyle Ampere Receptacle AC plug Description － 14－－ 15－ Gfci Receptacle－ 16－ － 17－ － 18－ － 19－ Idle Control Switch－ 20－ Stopping the Generator－ 21－ Wattage Information－ 22－ Voltage Drop in Electric Extension CordsSpark Arrester Spark Arrester－ 23－ Periodic Maintenance Maintenance ScheduleDaily Inspection － 24－－ 25－ Periodic Maintenance Schedule tableEngine OIL Filter Replacement HOW-TO MaintenanceEngine OIL Change － 26－Cleaning and Adjusting Spark Plug Servicing AIR Cleaner－ 27－ Fuel Hose Replacement Cleaning Fuel Strainer－ 28－ － 29－ Checking Carbon Brush－ 30－ Preparation for Storage－ 31－ Troubleshooting－ 32－ Wiring DiagramMakita Corporation

G12010R specifications

The Makita G12010R is a powerful and versatile electric angle grinder that stands out in the crowded market of power tools. Engineered for both professionals and DIY enthusiasts, this model combines advanced technology with a user-friendly design, making it ideal for a wide range of applications, including metalworking, construction, and home improvement.

One of the hallmark features of the Makita G12010R is its robust 1200W motor. This high-performance motor provides the necessary power to handle tough materials with ease, enabling users to cut, grind, and polish various surfaces effectively. The motor's design also ensures a consistent output, minimizing power fluctuations that can affect the quality of work.

The G12010R is equipped with a 125mm grinding disc, which offers a perfect balance between speed and precision. The grinder operates at a no-load speed of 11,000 RPM, allowing for rapid material removal and exceptional finishing quality. This speed, combined with the right attachment, makes it suitable for tasks ranging from grinding welds to removing rust and paint.

Another significant feature of the Makita G12010R is its ergonomic design. The lightweight body and soft-grip handle increase comfort during extended use, reducing fatigue and improving control. Additionally, the side handle can be easily adjusted to provide a variety of grips, making it adaptable for different working conditions and preferences.

Safety is a priority with the G12010R, which incorporates several protective features. The tool is fitted with a protective guard that helps shield users from sparks, debris, and potential hazards during operation. The push-button switch is designed for easy access and provides a quick and secure way to turn the grinder on and off.

Durability is another strong point of the Makita G12010R. Constructed with high-quality materials, this grinder is built to withstand the rigors of frequent use. The sealed motor housing protects internal components from dust and debris, extending the tool's lifespan and ensuring reliable performance over time.

In summary, the Makita G12010R electric angle grinder is a powerful and reliable tool that offers a blend of performance, safety, and comfort. With its impressive motor, design versatility, and robust construction, it is an excellent choice for professionals and home users looking to tackle various grinding and cutting tasks efficiently. Whether for metal fabrication or renovation projects, the G12010R quickly earns its place as an essential tool in any workshop or job site.
Top Page Image Contents