Agilent Technologies 24A, 54621D, 42A, 54621A, 22A Run/Stop/Single/Infinite Persistence Operation

Contents

4MegaZoom Concepts and Oscilloscope Operation MegaZoom Concepts 4-3

Deep Memory	4-4
Oscilloscope Responsiveness			4-5
Display Update Rate		4-6
To setup the Analog channels			4-7
To setup the Horizontal time base 4-11
Acquisition Modes		4-17
Display modes	4-21
Pan and Zoom	4-23
To pan and zoom a waveform			4-24

Run/Stop/Single/Infinite Persistence Operation 4-25

Acquiring Data 4-26
Memory Depth/Record Length		4-27
To run and stop an acquisition		4-28
To take a single trace 4-28
To capture a single event	4-29
To use infinite persistence	4-30

To use infinite persistence to store multiple repetitive events 4-30 To clear the waveform display 4-31

Configuring the Mixed-Signal Oscilloscope			4-32
To display digital channels using Autoscale		4-32
Interpreting the digital waveform display		4-33
To display and rearrange the digital channels 4-34
To turn individual channels on and off	4-35
To force all channels on or all channels off		4-36
To change the display size of the digital channels			4-36
To change the logic threshold for digital channels			4-37
Using Digital Channels to Probe Circuits	4-38

Using Labels on the Mixed-Signal Oscilloscope 4-42

To turn the label display on or off 4-43

To assign a predefined label to a channel 4-44

To define a new label 4-45

To reset the label library to the factory default 4-47

Contents-3