• Whenusingthevacuumattachment,• Alwaysusethecollectionbagshoul- theunitisdesignedtopickupdryma- derstrapwhenvacuumingtoavoid
terialsuchasleaves,grass,small lossofcontrol. twigs,andbitsofpaperDonotvacu.- • Checkairintakeopenings,elbowtube,
umstones,gravel,metal,broken andvacuumtubesfrequently,always glass,etc.toavoidseveredamageto, withtheunitstoppedandthepower theimpellerToavoidthepossibilityof. sourcedisconnectedKeepventsand. electricalshock,donotattempttovac- tubesfreeofdebriswhichcanaccu-
uumwaterorotherliquids. mulateandrestrictproperairflowDo.
•Neverruntheunitwithouttheproper notusewithanyopeningblocked, equipmentattachedWhenusedasa. Keepfreeofdust,lint,hairandany- vacuum,alwaysinstallvacuumtubes thingthatmayreduceairflow. andcollectionbagassemblyMake. STANDARDS
surethecollectionbagassemblyis This product is listed by Underwriters completelyzippedwhenunitisrunningLaboratories, Inc., in accordance with
toavoidflyingdebrisUseonlyrecom.- UL Standard 1017. mendedattachments.
•Avoidsituationswhichcouldsetthe If situations occur which are not covered collectionbagonfireDonotvacuum. in this manual, use care and good judg-
discardedmatches,cigars,cigarettes,ment. If you need assistance, contact orashfromfireplaces,barbecuepits, your Sears Service Center or call
brushpiles,etcToavoidspreading.
fire,donotuseblowernearleafor Safety Rules and Precautions can result
brushfires,fireplaces,barbecuepits, in serious injury. ashtrays,etc.
SAVE THESE INSTRUCTIONS
CARTON CONTENTS
Model 358.799430
•Blower
•Blower Tube/Nozzle
•2 Vacuum Tubes
•Collection Bag
Examine parts for damage. Do not use damaged parts.
NOTE: If you need assistance or find parts missing or damaged, call
_WARNING: | Stop the unit and |
disconnect from the power source be- fore opening the inlet cover or attempt- ing to insert or remove the inlet restrictor, blower tube/nozzle, or vacuum tubes. The motor must be stopped and the im- peller blades no longer turning to avoid serious injury from the rotating blades.
,t_ | If received as- |
dt_WARNING: |
sembled, ensure your unit is properly assembled and all fasteners are secure.
BLOWER ASSEMBLY
NOTE: Assembly instructions for using
your unit as a vacuum follow this sec- tion.
ATTACHING THE BLOWER TUBE/ NOZZLE
If you have already assembled your unit for use as a vacuum, remove the
vacuum tubes and the collection bag.
1.Insert the blower tube/nozzle into the blower outlet.
2.Twist the blower tube/nozzle
clockwise until it is firmly seated in the blower outlet. Make sure the
nozzle end points upward as shown in the following illustration.
Blower Tube/Nozzle
VACUUM ASSEMBLY
NOTE: Assembly instructions for using your unit as a blower are explained in the previous section.
If you have already assembled your unit for use as a blower, remove the blower tube/nozzle.
5