Craftsman 917.27404 owner manual Before Each USE, General Recommendations

MAINTENANCE					SCHEDULE
FILL	IN DATES
AS YOU COMPLETE
REGULAR		SERVICE					SERVICE DATES
	Check	Brake	Operation			_
		Tire	Pressure
T	Check	Operator		Presence		and
	Interlock	Systems				I_
R	Check	for Loose		Fasteners		If
A	Sharpen/Replace			Mower		Blades
C	Lubrication		Chart			v'	i/

0Check Battery Level

RClean Battery and Terminals Check Transaxle Cooling Check V-Belts

Check Engine Oil Level	If	If
Change Engine Oil (with oil filter)

E Change Engine Oil (without oil filter)

NClean Air Filter

GClean Air Screen

N_ Inspect Muffler/Spark

Arrester

,/

EReplace Oil Filter (If equipped) Clean Engine Cooling Fins Replace Spark Plug

Replace Air Filter Paper Cartridge Replace Fuel Filter

1- Change more often when operating under a heavy load or in high ambient temperatures.

2 - Service more often when operating in dirty or dusty conditions.

v'

3 - Replace blades more often when mowing in sandy soil,

4 - Not required if equipped with maintenance-free battery. 5 - Tighten front axle pivot bolt to 35 ft.-Ibs, maximum.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive

full value from the warranty, operator

must maintain tractor as instructed in this manual.

Some adjustments will need to be made

periodically to properly maintain your tractor.

At least once a season, check to see if you should make any of the adjustments

described in the Service and Adjustments section of this manual.

At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear.

A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

1.Check engine oil level.

2.Check brake operation.

3.Check tire pressure.

4.Check operator presence and interlock systems for proper operation.

5.Check for loose fasteners.

LUBRmCATmON CHART

(9 Spindle	--		Spindle
Zerk		__r	Zerk
		n
(bFront Wheel			; (gFront Wheel
Bearing		........	,L_Beanng Zerk
Zerk
@Engine	/	,	"--,
	,	',	i
	t	i	!
	',i
	,	',	01964;

(b General Purpose Grease

@ REFER TO Maintenance "ENGINE" SECTION

IMPORTANT: Do not oil or grease the pivot points which have special nylon

bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the

self-lubricating bearings. If you feel they must be lubricated, use only a dry, pow- dered graphite type lubricant sparingly.

18