Craftsman 917.27631 Tractor, Cleaning, Vice or Adjustments, To Remove Mower, Flanged Pins

Page 19

1.With engine cool, removefilterand plugfuel line sections.

2.Place newfuel filter in positionin fuel linewith arrow pointingtowardscarbu- retor.

3.Be sure there are no fuel lineleaks

and clampsare properlypositioned.

4.Immediatelywipe up any spilledgaso- line.

Clamp

Fuel Filte

CLEANING

Clean engine, battery, seat, finish, etc. of all foreign matter.

Keep finished surfaces and wheels free of all gasoline, oil, etc.

Protect painted surfaces with auto- motive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

&WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER-

VICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place gearshift lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key to "STOP" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

1.Place attachment clutch in "DISEN- GAGED" position.

2.If equipped, turn height adjustment knob to lowest setting.

3.Lower mower to its lowest position.

4.Disengage belt tension rod from lock bracket.

 

Lock Bracket

Belt Tension

Rod

(Disengaged j......-_:;

Position) _

//:'

Chassis

Bracket

Retainer

Spring

Anti-Sway Bal

CAUTION: Rod is spring loaded. Have a tight grip on rod and release slowly.

5.Remove retainer spring holding anti-swaybar to chassis bracket and disengage anti-sway bar from bracket.

6.Remove four retainer springs from front plate assembly and remove plate.

7.Remove retainer springs from suspen- sion arms at deck and disengage arms from deck.

Front Mower

Bracket Electric Clutch Pulley

Double Loop

Springs

Plate

- Assembly

Single Loop

Retainer Springs

"Flanged Pins

-. Front Mower

Bracket

USE PLIERS FOR]

Double Loop

Retainer Springs

RETAINER_pjSPRING 1 (Outward pointingShield deck pins)

19

0256E

Image 19
Contents ICHFT=MeN Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentGeneral Operation IV. Towing Service Safe Handling of GasolineII. Slope Operation II1. ChildrenGeneral Service Repair Protection Agreements Product SpecificationsSears Installation Service Customer ResponsibilitiesUnpack Carton Check BatteryAdjust Seat To Remove Tractor from CartonCheck Deck Levelness ChecklistTo Drive Tractor OFF Skid Checktire Pressure===m Light Know YOU R TractorLever Lift LeverTo SET Parking Brake To Adjust Mower Cutting HeightHowto Useyourtractor StoppingReverse Operation System ROS To Adjust Gauge WheelsUsing the Reverse Operation System To Operate MowerTo Transport Before Starting the EngineCheck Engine OIL Level Mowing Tips Check engine oil level Check brake operation ChartGeneral Recommendations Before Each USEOperator Presence System TractorBrake Operation TiresCheck Transaxle OIL Level BatteryEngine Transaxle CoolingAIR Filter Clean AIR ScreenMuffler Tractor CleaningVice or Adjustments Flanged PinsFRONT-TO-BACK Adjustment To Install MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentTo Replace Mower Drive Belt Both Front Plate Links Must be Equal in LengthMower Drive Belt Removal To Replace Mower Blade SEC Ondary Drive Belt With parking brake Engaged To Adjust Attachment ClutchTo Check and Adjust Brake LocknutTo Remove Wheel for Repairs Front Wheel To Adjust Steering Wheel ALIGN- MentReplacing Battery To Start Engine with Aweak BAT- TeryTo Replace Fuse To Adjustthrottle Control CableTo Adjust Choke Control Interlocks and RelaysTo Adjust Carburetor Cylinders Fully charge the battery for storageFuel System Engine OILCause Troubleshooting ChartProblem Hard to start Engine will not turn over3ORRECTION Problem CauseCorrection When turning engine OFFMower blades will Not rotateTRACTOR- Model Number SchematicElectrical Tractor - Model NumberKEY Part Description Tractor - Model Number Chassis and Enclosures TRACTOR- Model Number Chassis and Enclosures Tractor - Model Number Ground Drive 7563R TRACTOR- Model Number Ground DriveTractor - Model Number Steering Assembly KEY Part NO. no TRACTOR- Model Number Steering Assembly21 J KEY Part Tractor - Model Number Seat AssemblyDescription Wheels Decals121006X Red Asm,, Lever Lift AssemblyTractor - Model Number Mower Deck Relief TRACTOR- Model Number Mower DeckTransaxle 174731 Transaxle265 48m 3o3 Briggs & Stratton ENGINE-MODEL Tractor Model NumberNumber 446677-0470-E1 Page Page Suggested Guide for Sighting Slopes for Safe Operation 11-800-469-4663 Your Home

917.27631 specifications

The Craftsman 917.27631 is a robust lawn mower designed for homeowners who seek a reliable, efficient, and durable machine for maintaining their lawns. This mower features a powerful 21-inch cutting deck, making it capable of handling medium to large-sized yards with ease. One of its standout features is the 163cc gas engine, which provides ample power for tackling tough grass and uneven terrain while ensuring reliable starts and consistent performance.

The Craftsman 917.27631 is equipped with a self-propelled drive system, which allows users to navigate effortlessly through their lawns without the need for excessive physical strain. The variable speed control gives users the option to adjust the speed according to their preference and the terrain, ensuring optimal maneuverability. This feature is particularly beneficial for navigating around garden beds, trees, and other obstacles.

Another impressive aspect of the Craftsman 917.27631 is its 3-in-1 cutting capability. This versatile mower allows users to choose between mulching, bagging, or side discharge, providing flexibility based on preferences and conditions. The mulching capability promotes healthy lawn growth by returning finely chopped grass back to the soil, while the rear bagging option allows for easy collection of clippings for disposal or composting.

The mower also boasts an adjustable cutting height, which can be easily altered to ensure the perfect grass length for various seasons and grass types. Users can choose from multiple height settings, ensuring compatibility with different mowing needs. Moreover, the durable and lightweight construction of the Craftsman 917.27631 enhances its maneuverability and makes it easier to transport and store.

Safety features are paramount in the design of the Craftsman 917.27631. The engine will stop immediately when the operator releases the handle, preventing accidental injuries and promoting safe operation. Additionally, the ergonomic handle design adds comfort, reducing fatigue during prolonged use.

In summary, the Craftsman 917.27631 is a versatile, powerful, and easy-to-use lawn mower that caters to a wide array of lawn maintenance needs. With its self-propelling capabilities, adjustable cutting height, and efficient 3-in-1 cutting options, it represents a solid choice for any homeowner looking to maintain a pristine lawn with minimal effort.