Craftsman 917.27631 owner manual Mower blades will, Not rotate, Correction, Remove obstruction

Page 30

TROUBLESHOOTING CHART:

See appropriate section in manual unless directed to Sears service center

PROBLEM

CAUSE

 

 

Mower blades will 1.

Obstruction

in clutch

not rotate

mechanism.

 

2.

Worn/damaged

mower

 

drive

belt.

 

3.

Frozen

idler

pulley.

4.

Frozen

blade

mandrel.

Poor grass1. Engine speed too slow. discharge

2.Travel speed too fast.

3.Wet grass.

4.Mower deck not level.

5.Low/uneven tire air pressure.

6.Worn, bent or loose blade.

7.Buildup of grass, leaves and trash under mower.

8.Mower drive belt worn.

9.Blades improperly installed.

10.improper blades used.

11.Clogged mower deck vent holes from buildup of grass, leaves, and trash around mandrels.

CORRECTION

1.Remove obstruction.

2.Replace mower drive belt.

3.Replace idler pulley.

4.Contact a Sears or other qualified service center.

1.Place throttle control in

"FAST" position.

2.Shift to slower speed.

3.Allow grass to dry before mowing.

4.Level mower deck.

5.Check tires for proper air pressure.

6.Replace/sharpen blade.

Tighten blade bolt.

7.Clean underside of mower housing.

8.Replace mower drive belt.

9.Reinstall blades sharp edge down.

10.Replace with blades listed in this manual.

11.Clean around mandrels to open vent holes.

Headlight(s) not 1. Light switch is "OFF".

working2. Bulb(s) or lamp(s) burned out.

if so equipped) 3. Faulty light switch.

4.Loose or damaged wiring.

5.Blown fuse.

1.

Turn light

switch

"ON".

2.

Replace

bulb(s)

or

lamp(s).

3.

Check/replace

light

switch.

4.

Check wiring and connec-

 

tions.

 

 

 

5.

Replace

fuse.

 

 

Battery will not charge

Engine "backfires"

when turning engine "OFF"

1.Bad battery cell(s).

2.Poor cable connections.

3.Faulty regulator (if so equipped).

4.Faulty alternator.

1.Engine throttle control not set between half and full speed (fast) position before stopping engine.

1. Replace battery.

2.Check/clean all connec- tions.

3.Replace regulator.

4.Replace alternator.

. Move throttle control between half and full speed (fast) position before stopping engine.

30

Image 30
Contents ICHFT=MeN Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II1. Children Service Safe Handling of GasolineII. Slope Operation IV. TowingGeneral Service Customer Responsibilities Product SpecificationsSears Installation Service Repair Protection AgreementsTo Remove Tractor from Carton Check BatteryAdjust Seat Unpack CartonChecktire Pressure ChecklistTo Drive Tractor OFF Skid Check Deck Levelness===m Lift Lever Know YOU R TractorLever LightStopping To Adjust Mower Cutting HeightHowto Useyourtractor To SET Parking BrakeTo Operate Mower To Adjust Gauge WheelsUsing the Reverse Operation System Reverse Operation System ROSBefore Starting the Engine To TransportCheck Engine OIL Level Mowing Tips Before Each USE ChartGeneral Recommendations Check engine oil level Check brake operationTires TractorBrake Operation Operator Presence SystemTransaxle Cooling BatteryEngine Check Transaxle OIL LevelClean AIR Screen AIR FilterMuffler Flanged Pins CleaningVice or Adjustments TractorSIDE-TO-SIDE Adjustment To Install MowerTo Level Mower Housing FRONT-TO-BACK AdjustmentBoth Front Plate Links Must be Equal in Length To Replace Mower Drive BeltMower Drive Belt Removal To Replace Mower Blade SEC Ondary Drive Belt Locknut To Adjust Attachment ClutchTo Check and Adjust Brake With parking brake EngagedTo Start Engine with Aweak BAT- Tery To Adjust Steering Wheel ALIGN- MentReplacing Battery To Remove Wheel for Repairs Front WheelInterlocks and Relays To Adjustthrottle Control CableTo Adjust Choke Control To Replace FuseTo Adjust Carburetor Engine OIL Fully charge the battery for storageFuel System CylindersHard to start Engine will not turn over Troubleshooting ChartProblem CauseProblem Cause 3ORRECTIONNot rotate When turning engine OFFMower blades will CorrectionSchematic TRACTOR- Model NumberTractor - Model Number ElectricalKEY Part Description Tractor - Model Number Chassis and Enclosures TRACTOR- Model Number Chassis and Enclosures Tractor - Model Number Ground Drive TRACTOR- Model Number Ground Drive 7563RTractor - Model Number Steering Assembly TRACTOR- Model Number Steering Assembly KEY Part NO. no21 J Tractor - Model Number Seat Assembly KEY PartDescription Decals WheelsLift Assembly 121006X Red Asm,, LeverTractor - Model Number Mower Deck TRACTOR- Model Number Mower Deck ReliefTransaxle Transaxle 174731265 48m 3o3 Tractor Model Number Briggs & Stratton ENGINE-MODELNumber 446677-0470-E1 Page Page Suggested Guide for Sighting Slopes for Safe Operation Your Home 11-800-469-4663

917.27631 specifications

The Craftsman 917.27631 is a robust lawn mower designed for homeowners who seek a reliable, efficient, and durable machine for maintaining their lawns. This mower features a powerful 21-inch cutting deck, making it capable of handling medium to large-sized yards with ease. One of its standout features is the 163cc gas engine, which provides ample power for tackling tough grass and uneven terrain while ensuring reliable starts and consistent performance.

The Craftsman 917.27631 is equipped with a self-propelled drive system, which allows users to navigate effortlessly through their lawns without the need for excessive physical strain. The variable speed control gives users the option to adjust the speed according to their preference and the terrain, ensuring optimal maneuverability. This feature is particularly beneficial for navigating around garden beds, trees, and other obstacles.

Another impressive aspect of the Craftsman 917.27631 is its 3-in-1 cutting capability. This versatile mower allows users to choose between mulching, bagging, or side discharge, providing flexibility based on preferences and conditions. The mulching capability promotes healthy lawn growth by returning finely chopped grass back to the soil, while the rear bagging option allows for easy collection of clippings for disposal or composting.

The mower also boasts an adjustable cutting height, which can be easily altered to ensure the perfect grass length for various seasons and grass types. Users can choose from multiple height settings, ensuring compatibility with different mowing needs. Moreover, the durable and lightweight construction of the Craftsman 917.27631 enhances its maneuverability and makes it easier to transport and store.

Safety features are paramount in the design of the Craftsman 917.27631. The engine will stop immediately when the operator releases the handle, preventing accidental injuries and promoting safe operation. Additionally, the ergonomic handle design adds comfort, reducing fatigue during prolonged use.

In summary, the Craftsman 917.27631 is a versatile, powerful, and easy-to-use lawn mower that caters to a wide array of lawn maintenance needs. With its self-propelling capabilities, adjustable cutting height, and efficient 3-in-1 cutting options, it represents a solid choice for any homeowner looking to maintain a pristine lawn with minimal effort.