Craftsman 917.27631 To Drive Tractor OFF Skid, Checktire Pressure, Check Deck Levelness

Page 8

TO DRIVE TRACTOR OFF SKID

(See Operation section for location

and function of controls)

_h,WARNING: Before starting, read, un- derstand and follow all instructions in the

Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other

people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Sit on seat in operating position,

depress clutch/brake pedal and set the parking brake.

4.Place gear shift lever in neutral (N) position.

5.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

8.Slowly release clutch/brake pedal and

slowly drive tractor off skid.

9.Apply brake to stop tractor, set park- ing brake and place gearshift lever in neutral position.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

CHECKTIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Cor- rect tire pressure is important for best cutting performance.

Reduce tire pressure to PSi shown in

"PRODUCT SPECIFICATIONS" section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower hous-

ing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service

and Adjustments section of this manual.

CHECK FOR PROPER POSITION

OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual.

,/CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product.

Please review the following checklist: ,/All assembly instructions have been

completed.

,/No remaining loose parts in carton. ,/Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and tight-

ened securely.

,/All tires are properly inflated. (For ship- ping purposes, the tires were overin- fiated at the factory).

,/Be sure mower deck is properly leveled

side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

,/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

,/Check wiring. See that all connections are still secure and wires are properly clamped.

While learning how to use your tractor, pay extra attention to the following important items:

,/Engine oil is at proper level.

,/Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.

,/Become familiar with all controls, their location and function. Operate them before you start the engine.

,/Be sure brake system is in safe operat- ing condition.

,/Be sure Operator Presence System and Reverse Operation System (ROS)

are working properly (See the Opera- tion and Maintenance sections in this

manual).

8

Image 8
Contents ICHFT=MeN Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation Service Safe Handling of Gasoline II. Slope OperationII1. Children IV. TowingGeneral Service Product Specifications Sears Installation ServiceCustomer Responsibilities Repair Protection AgreementsCheck Battery Adjust SeatTo Remove Tractor from Carton Unpack CartonChecklist To Drive Tractor OFF SkidChecktire Pressure Check Deck Levelness===m Know YOU R Tractor LeverLift Lever LightTo Adjust Mower Cutting Height Howto UseyourtractorStopping To SET Parking BrakeTo Adjust Gauge Wheels Using the Reverse Operation SystemTo Operate Mower Reverse Operation System ROSCheck Engine OIL Level Before Starting the EngineTo Transport Mowing Tips Chart General RecommendationsBefore Each USE Check engine oil level Check brake operationTractor Brake OperationTires Operator Presence SystemBattery EngineTransaxle Cooling Check Transaxle OIL LevelMuffler Clean AIR ScreenAIR Filter Cleaning Vice or AdjustmentsFlanged Pins TractorTo Install Mower To Level Mower HousingSIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentMower Drive Belt Removal Both Front Plate Links Must be Equal in LengthTo Replace Mower Drive Belt To Replace Mower Blade SEC Ondary Drive Belt To Adjust Attachment Clutch To Check and Adjust BrakeLocknut With parking brake EngagedTo Adjust Steering Wheel ALIGN- Ment Replacing BatteryTo Start Engine with Aweak BAT- Tery To Remove Wheel for Repairs Front WheelTo Adjustthrottle Control Cable To Adjust Choke ControlInterlocks and Relays To Replace FuseTo Adjust Carburetor Fully charge the battery for storage Fuel SystemEngine OIL CylindersTroubleshooting Chart ProblemHard to start Engine will not turn over CauseProblem Cause 3ORRECTIONWhen turning engine OFF Mower blades willNot rotate CorrectionSchematic TRACTOR- Model NumberTractor - Model Number ElectricalKEY Part Description Tractor - Model Number Chassis and Enclosures TRACTOR- Model Number Chassis and Enclosures Tractor - Model Number Ground Drive TRACTOR- Model Number Ground Drive 7563RTractor - Model Number Steering Assembly TRACTOR- Model Number Steering Assembly KEY Part NO. no21 J Description Tractor - Model Number Seat AssemblyKEY Part Decals WheelsLift Assembly 121006X Red Asm,, LeverTractor - Model Number Mower Deck TRACTOR- Model Number Mower Deck ReliefTransaxle Transaxle 174731265 48m 3o3 Tractor Model Number Briggs & Stratton ENGINE-MODELNumber 446677-0470-E1 Page Page Suggested Guide for Sighting Slopes for Safe Operation Your Home 11-800-469-4663

917.27631 specifications

The Craftsman 917.27631 is a robust lawn mower designed for homeowners who seek a reliable, efficient, and durable machine for maintaining their lawns. This mower features a powerful 21-inch cutting deck, making it capable of handling medium to large-sized yards with ease. One of its standout features is the 163cc gas engine, which provides ample power for tackling tough grass and uneven terrain while ensuring reliable starts and consistent performance.

The Craftsman 917.27631 is equipped with a self-propelled drive system, which allows users to navigate effortlessly through their lawns without the need for excessive physical strain. The variable speed control gives users the option to adjust the speed according to their preference and the terrain, ensuring optimal maneuverability. This feature is particularly beneficial for navigating around garden beds, trees, and other obstacles.

Another impressive aspect of the Craftsman 917.27631 is its 3-in-1 cutting capability. This versatile mower allows users to choose between mulching, bagging, or side discharge, providing flexibility based on preferences and conditions. The mulching capability promotes healthy lawn growth by returning finely chopped grass back to the soil, while the rear bagging option allows for easy collection of clippings for disposal or composting.

The mower also boasts an adjustable cutting height, which can be easily altered to ensure the perfect grass length for various seasons and grass types. Users can choose from multiple height settings, ensuring compatibility with different mowing needs. Moreover, the durable and lightweight construction of the Craftsman 917.27631 enhances its maneuverability and makes it easier to transport and store.

Safety features are paramount in the design of the Craftsman 917.27631. The engine will stop immediately when the operator releases the handle, preventing accidental injuries and promoting safe operation. Additionally, the ergonomic handle design adds comfort, reducing fatigue during prolonged use.

In summary, the Craftsman 917.27631 is a versatile, powerful, and easy-to-use lawn mower that caters to a wide array of lawn maintenance needs. With its self-propelling capabilities, adjustable cutting height, and efficient 3-in-1 cutting options, it represents a solid choice for any homeowner looking to maintain a pristine lawn with minimal effort.