Craftsman 917.273401 owner manual General Recommendations, Before Each USE, Check tire pressure

MAINTENANCE SCHEDULE

F,LL,.OATES

AS YOU COMPLETE

_ Sharpen/Replace Mower Blades

T Lubrication Chart

0Check Battery Level

Change Engine Oil (with oil fitter)

EChange Engine Oil (without oil filter)

GN CleanAirFilterScreen

_ Inspect Muffler/Spark Arrester

EReplace Oil Filter (If equipped) Clean Engine Cooling Fins

Replace Spark Plug

Replace Air Filter Paper Cartridge

Replace Fuel Filter

t - Change more often when operating under a heavy load or in high ambient temperatures.

2 - Service more often when operating in dirty or dusty conditions.

._f_ ,_-_ _ _ o-_ ,_/_,

E RVIC E DATES

_1_5

_3

_4

_

I1_

_1,:

_1_1,2

_:

_2 _2

_2

3 - Replace btades more often when mowing in sandy soil

4 - Not required if equipped with maintenance-free battery. 5 - Tighten front axle pivot bog to 35 ft.qbs, maximum.

DO not overtighten.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have been subjected to

operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.

Some adjustments will need to be made

periodically to properly maintain your tractor.

At least once a season, check to see if you should make any of the adjustments

Bearing _,_

Zerk _,h

:======' / ,_earing Zerk

'O i

described in the Service and Adjustments section of this manual.

•At least once a year you should replace

the spark plug, clean or replace air filter, and check blades and belts for wear.

A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

1.Check engine oil level.

2.Check brake operation.

3.Check tire pressure.

4.Check operator presence and interlock systems for proper operation.

5.Check for loose fasteners.

@PEngine',.-_-', I ,'

General Purpose Grease

REFER TO Maintenance "ENGINE" SECTION

IMPORTANT: Do not oil or grease the pivot points which have special nylon

bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the

self-lubricating bearings. If you feel they must be lubricated, use only a dry, pow- dered graphite type lubricant sparingly.