HP RX4610 manual Known Error Messages

In Case of Trouble

Error Messages

Error Messages

As an install progresses, you will see messages relating to the progress being entered into the log file. These messages usually refer to normal behavior. ERROR and WARNING messages, however, have the following significance:

ERROR	Indicates a serious problem, usually requiring action
	from the user in order to proceed with an installation.
WARNING	Indicates something out of the ordinary, but not fatal.
	The warning may require action.
NOTE	Indicates something out of the ordinary, but not fatal.
	The note does not require action.

Known Error Messages

The following message is placed in the swagent.log and install.log files after installing HP-UX 11i Version 1.5 (B.11.20):

*Installing fileset "HPvxvm.VXVM-KRN,r=B.11.20.%30" (12 of 274).

NOTE: The VxVM drivers have been added to the /stand/system file. You must build the kernel and reboot. You need to build the kernel and reboot only if the installation process does not automatically do it for you.

Use " /usr/sbin/mk_kernel -s /stand/system " to build the new kernel.

This message is produced because the is_kernel and is_reboot flags in the fileset are not set properly. It is strictly informational and does not affect the actual installation. A kernel build occurs automatically at the end of the installation.

46 Appendix B