HP RX4610 manual Data Collection Tables, Table C-1 Network Information

Data Collection Tables

C Data Collection Tables

	You will need to supply the information in the following tables when
	installing HP-UX 11i Version 1.5 (B.11.20).
	If you chose the guided install, you will be prompted for the information
	in these tables at various stages throughout the install, by the HP-UX
	Install Wizard.
	If you chose the Advanced Install, you will be given the opportunity to
	enter all of this information at the beginning of the install using a tabbed
	file-folder character-based interface.
	If you choose to network-enable your system, you must designate a
NOTE
	unique host name, host IP address, and other network information for
	your server or workstation. Refer to your site network administrator for
	those details to include in these tables.

If there is an HP-UX command that you can use after the install to confirm specific information entered by a command, it is provided with that command in the data collection table.

	Table C-1		Network Information
Type of Information		Your Specific Information		How to confirm information
				after system is up
Host Name				uname -n
Host IP Address				nslookup name
Subnet Mask				grep SUBNET_MASK
				/etc/rc.config.d/netconf
Default Gateway IP				netstat -r
Address
Domain Name				cat /etc/resolv.conf
DNS IP Address				cat /etc/resolv.conf
DNS Domain Name				grep NIS_DOMAIN
				/etc/rc.config.d/namesvrs

Appendix C 47