Introduction and Related Information
SCSI Devices
Changing to Manual mode allows access to all the fields in the device settings screen.
Step 3. Choose
Configuration Settings->SCSI Device Settings->Bus 1
Press TAB to move to the left column (affects all devices in this model)
Jamaica BOX JBOD (Fast settings):
Sync Offset: 8
Sync Period: 25
SC10 Megatron (Ultra2 settings):
Sync Offset: 14
Sync Period: 10
Step 4. Configuration
Changing back to AUTO mode allows autonegotiation to occur but based on the new device settings. Leaving this at Manual may cause the card to complain with warnings as the settings are forced on the SCSI devices without negotiation.
Step 5. Save changes and reboot
Chapter 1 | 25 |
