Craftsman 917.273401 Check Deck Levelness, Install Mulcher Plate, Discharging, Check Brake System

Page 10

INSTALL MULCHER PLATE

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

Mulcher

DeflectorPlate

Shield

Latch

Hooks

f

A

all.CAUTION: Do not remove deflector shield from mower.

TO CONVERTTO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place.Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulching blades are designed for discharging and bagging also.

CHECKTIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Cor- rect tire pressure is important for best cutting performance.

Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower hous- ing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in

the Service and Adjustments section of this manual.

v"CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this quality product.

Please review the following checklist:

,/ All assembly instructions have been completed.

,/No remaining loose parts in carton. ,/Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and tight-

ened securely.

,/All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).

,/Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting

results. (Tires must be properly inflated for leveling).

,/Check mower and drive belts. Be sure

they are routed properly around pulleys and inside all belt keepers.

,/Check wiring. See that all connections are still secure and wires are properly clamped.

,/Before driving tractor, be sure freewheel control is in '"transmission engaged"

position (see "TO TRANSPORT" in the Operation section of this manual).

While learning how to use your tractor, pay

extra attention to the following important items:

,/Engine oil is at proper level.

,/Fuel tank is filled with fresh, clean,

regular unleaded gasoline.

,/Become familiar with all controls - their location and function. Operate them before you start the engine.

,/Be sure brake system is in safe oper- ating condition.

,/It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and trans-

mission purging instructions (See "TO START ENGINE" and "PURGE TRANS-

MISSION" in the Operation section of this manual).

10

Image 10
Contents Icrrftsmrni Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationDo not IV. ServiceIII. Children Page Repair Protection Agreements Sears Installation ServiceCustomer Responsibilities HomeSteering Wheel Slope SheetTo Remove Tractor from Tools Required for AssemblyInstall Seat Before Removing Tractor from Skid Attach Steering WheelCheck Battery Discharging Install Mulcher PlateCheck Deck Levelness Check for Proper Position of ALL BeltsH L I,,I Lift Lever Plunger Know Your TractorAmmeter AttachmentGround Drive HOW to USE Your TractorTo SET Parking Brake EngineTransmission Engaged Transmission Disengaged To Operate MowerTo Operate on Hills Before Starting the EngineTo Start Engine ADD GasolineAutomatic Transmission Warm UP Purge Transmission Mowing TipsMulching Mowing Tips Before Each USE General RecommendationsCheck tire pressure Operator Presence System BatteryTractor Blade RemovalTransaxle Pump Fluid EngineLubrication AIR Filter Clean AIR ScreenEngine OIL Filter Spark Plugs CleaningMuffler Protect painted surfaces with auto- motive type waxTractor Service or AdjustmentsTo Install Mower To Remove MowerSIDE-TO-SIDE Adjustment To Level Mower HousingBelt Removal Beltinstallation Belt InstallationTo Adjust Steering Wheel Align Ment Transaxle Motion Control LE VER Neutral AdjustmentTransmission Removal Replacement To Start Engine with a Weak BAT- TeryInterlocks and Relays Replacing BatteryTo Attach Jumper Cables To Replace FuseTo Adjust Carburetor To Adjustthrottle Control CablePreliminary Setting Engine OIL BatteryFuel System CylindersProblem Troubleshooting ChartCause Correction Not rotate CauseMower blades will Poor grassHeadlights Not Battery Will NotWhen turning WorkingTractor - Model Number Schematic Fuel SHUT-OFF SolenoidTractor - Model Number Electrical KEY Part Description Tractor - Model Number 917.273401 Chassis and Enclosures Tractor - Model Number Chassis and Enclosures 208Tractor - Model Number Ground Drive KEY Part Description Tractor - Model Number 917.273401 Steering Assembly Tractor - Model Number 917.273401 Steeringassembly Tractor -- Model Number Engine Tractor -- Model Number 917.273401 Seat Assembly X20 Tractor -- Model Number DecalsTractor -- Model Number Lift Assembly 2O2OTractor - Model Number Mower Deck Tractor - Model Number Mowerdeck 44B 150 115 32 49 106 65 Li 114,i 127 208 183 T85 182 4371D .078W 434 13J OZZCARBURETOROASKETSET121AOVERHAUL KIT Intake 146 691639 Key-Timing 691279 309 693551 Motor-Starter 868 690968 Suggested Guide for Sighting Slopes for Safe Operation Your Home

917.273401 specifications

The Craftsman 917.273401 is a powerful and versatile lawn tractor designed to tackle a variety of landscaping tasks while providing users with a smooth and efficient mowing experience. This model combines robust construction with advanced technologies to meet the needs of homeowners and gardeners alike.

One of the standout features of the Craftsman 917.273401 is its reliable engine. Powered by a 20-horsepower Briggs & Stratton engine, this lawn tractor delivers ample power to handle thick grass and uneven terrain. The engine is designed for easy starts and dependable performance, ensuring users can rely on their mower season after season.

In terms of cutting capabilities, the Craftsman 917.273401 is equipped with a 42-inch cutting deck. This wide deck allows for efficient mowing over medium to large lawns, reducing the time it takes to cover ground. Moreover, the deck is adjustable, providing users with the flexibility to select different cutting heights, ranging from 1.5 to 4 inches. This feature is essential for achieving the desired lawn appearance and accommodating various grass types.

The tractor's transmission system is another highlight, featuring a hydrostatic transmission that offers smooth and effortless speed adjustments. This technology allows users to drive at their preferred pace without the need for manual gear shifting, making the mowing process more enjoyable and less strenuous.

Comfort and usability are prioritized in the Craftsman 917.273401, showcased by its ergonomic seating and user-friendly controls. The high-back seat reduces fatigue during long mowing sessions, while the easy-access dashboard ensures that all necessary controls are within reach. Additionally, the tractor is designed with a tight turning radius, enabling users to maneuver around obstacles and tight spaces with ease.

Furthermore, the Craftsman 917.273401 is compatible with various attachments and accessories, such as baggers, snow plows, and mulching kits. This versatility extends the lawn tractor's utility beyond mowing, allowing users to tackle different tasks throughout the year.

In summary, the Craftsman 917.273401 stands out in the realm of lawn maintenance with its powerful engine, adjustable cutting deck, hydrostatic transmission, and user-centric design. Whether you're mowing a suburban lawn or managing a larger property, this lawn tractor offers the features and performance necessary to achieve a well-groomed landscape with ease.