Craftsman 917.27207 To Replace Mower Blade Drive Belt, Belt Removal, Belt Installation

Page 23

TO REPLACE MOWER BLADE DRIVE BELT

The mower blade drive belt may be

replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

1, Remove mower from tractor (See "TO

REMOVE MOWER" in this section of this manual).

2.Work belt off both mandrel pulleys and idler purleys.

3.Pull belt away from mower.

BELT INSTALLATION -

4.Install new belt in reverse order of removal.

5.Make sure belt is in all pulley grooves and inside all belt guides.

6.Install mower in reverse order of removal instructions.

Mandrel

 

Pulley _

Idler Pulleys

Mandrel

Pulley

TO ADJUST BRAKE

Your tractor is equipped with an adjust- able brake system which is mounted on the right side of the transaxre.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

1.Depress clutch/brake pedal and engage parking brake.

2.Measure distance between brake

operating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is neces- sary. Contact a Sears or other qualified service center.

With Parking Brake "Engaged"

Nut "A"

Jam Nut

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a

belt installation guide decal on bottom side of left footrest.

1.Remove mower (See "TO REMOVE MOWER" in this section of this

manual.)

2.Remove belt from stationary idler and clutching idler.

3.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

4.Pull belt toward front of tractor and remove downwards from around engine pulley.

5.Install new belt by reversing above procedure.

Engine

Pulley--

Clutohing-_-- --_,A_

Idler

Stationary--"

Id{er

/

Transaxle_. "-'

23

Image 23
Contents ICRRFTSMRN+I Limited 90 DAY Warranty on Battery Do not General OperationII. Slope Operation III. Children IV. ServiceSafety is Involved Customer Responsibilities 3APACITYRepair Agreement Steering WheelInsert To Removetractor from Carton Tools Required For AssemblyHowto SET Upyourtractor Check Battery Before Removingtractor from Skid Attach Steering WheelInstall Seat Checklist Install Mulcher PlateRlR N H L Parking Brake Lever Locks KnowyourtractorAttachment Clutch Lever Used To Move Forward and Backward To Adjust Mower Cutting HeightHowto Useyourtractor To SET Parking Brake To USE Throttle ControlTo Transport To Adjust Gauge WheelsTo Operate Mower To Operate On RillsTo Start Engine Towing Carts and Other AttachmentsBefore Startingthe Engine Check Engine OIL Level ADD GasolineMOWlNGTIPS Mower should be properly leveled for Level Mower HousingBefore Each USE Maintenance ScheduleLubrication Chart General RecommendationsBlade Care Brake OperationTires Operator Presence SystemTransaxle Cooling Clean AIR ScreenClean AIR Intakfjcooling Areas BeltsMuffler AIR FilterSpark Plugs Engine OIL FilterTractor To Remove Mower CleaningTo Install Mower Raise mower to its highest position To Level Mower HousingUnderinflated, you will not properly adjust your mower SIDE-TO-SIDE AdjustmentBelt Removal Belt InstallationTo Adjust Brake To Replace Mower Blade Drive BeltTo Start Engine with a Weak Transaxle Gear Shift Lever Neutral AdjustmentBattery To Adjust Steering Wheel AlignmentInterlocks and Relays Replacing BatteryTo Remove Hood and Grill Assembly To Replace Headlight BulbSrPecedetC EngineCable Seats in carburetor may result if turned in too tightCylinders TractorEngine Fuel System EngineoilEngine Troubleshooting ChartProblem Cause CorrectionPoor cut uneven ProblemcauseExcessive VibrationNot rotate Battery Will NotWhen turning Mower blades willTractor - Model Number SchematicElectrical 27 73510400 Nut Keps Hex 1/4-20 Uric 22 4152JBulb Light #1156Tractor - Model Number Chassis and Enclosures 18 126938X BumperHood Tractor -- Model Number Chassis and Enclosures169830 16 x 3/4166 TRACTOR- Model Number Ground Drive11G 150Return Brake TransaxleEngine 146682Tractor - Model Number Steering Assembly Fitting, Grease Tractor - Model Number 917.272070 Steering Assembly139768 154427158990 Spark Arrester170548 Control, Throttle 17720410 Brn/Dbr Guard13/32 Tractor - Model Number Seat AssemblyBlk 72050412 1700O16Wheels & Tires Decals163552 Tractor - Model Number Lift Assembly1718 173288 Link FrontTractor --MODEL Number Mower Deck TRACTOR--MODEL Number Mower Deck 41A PEERLESSTRANSAXLE- Model Number 206-545C Cylinder HEAD, Valve and Breatheri Rod, push IGNITION/ELECTRICAL Blower Housing and Bafflesi 12-083-f2-S 12-041-02-S Gasket Air Cleaner12-113-53-S Decal Air Cleaner Inches 1 inch = 25.4 mm 12-096o24-SKk t,J Starting System Crankshaftj Exhaust Kit, fuel Page Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationGet it fixed, at your home or ours

917.27207 specifications

The Craftsman 917.27207 is a versatile and robust lawn mower that combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effortlessly. This walk-behind mower is designed to tackle various grass types and terrains, ensuring a clean, even cut every time.

One of the standout features of the Craftsman 917.27207 is its powerful engine. Equipped with a dependable 159cc engine, it provides ample power to handle even the thickest grass. The manual start ensures reliability, allowing users to get their mowing tasks done quickly without worrying about battery issues. The engine is designed for fuel efficiency, helping homeowners save on gas while minimizing their environmental footprint.

In addition to its powerful engine, the Craftsman 917.27207 features a 21-inch cutting deck. This mid-sized deck strikes a perfect balance between maneuverability and cutting capacity, making it ideal for small to medium-sized lawns. The steel construction adds durability, promising longevity and resilience against wear and tear.

Another key characteristic of the Craftsman 917.27207 is its adjustable cutting heights. With six different height settings, ranging from 1.25 inches to 3.75 inches, users can customize their mowing experience to achieve their desired grass length. This feature is particularly beneficial during different seasons when grass growth varies.

The mower also includes a rear bagger option, making grass collection efficient and hassle-free. The 2-in-1 functionality allows users to choose between mulching and bagging, providing flexibility based on their lawn care preferences. The mulching feature finely chops grass clippings, allowing them to return to the lawn as natural fertilizer, promoting healthier growth.

In terms of ergonomics, the Craftsman 917.27207 is designed with user comfort in mind. The adjustable handle provides customizable height options, ensuring that users can mow comfortably without straining their backs. Lightweight yet sturdy, the mower is easy to maneuver around obstacles and tight corners.

Ultimately, the Craftsman 917.27207 brings together power, performance, and adaptability, making it a solid choice for any DIY lawn care enthusiast. With its impressive features and reliable engineering, keeping lawns looking their best has never been easier.