To Adjust Gauge Wheels, To Operate Mower

Craftsman 917.271742 To Adjust Gauge Wheels, To Operate Mower, To Operate on Hills, To Transport

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches

dudng hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting

height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

1.Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING

HEIGHT" in the Operation section of this manual).

2.With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/ 8 washer, and 3/8-16 Iocknut and tighten securely.

3.Repeat for opposite side installing

gauge wheel in same adjustment hole.

GaugeWheel_ -- .---_\			._	_
Mounting	4"	_ _/	"	__.
Bracket	" \	_		"
"8-16 LCC__
3/8 Washer_		r_/	_	Shoulder
GaugeWheelf_'_			_	Bolt

TO OPERATE MOWER

Yourtractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

1.Select desired height of cut.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

_CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

Attachment	Attachemnt
Clutch
"Engaged"	High
Position	Position
	Position
Position	Deflector
	Deflector

TO OPERATE ON HILLS

ACAUTON: Do not drive up O_'odOWn hills with slopes greater than 15 and do

not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move motion control lever to neutral (N)

position.

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is de- pressed,

•To restart movement, slowly release parking brake and clutch/breke pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

1.Raise attachment lift to highest position with attachment lift control.

2.Pull freewheel control out and down into the slot and release so it is held in

the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

917.271742 specifications

The Craftsman 917.271742 lawn tractor is a versatile and powerful machine designed for homeowners seeking a reliable solution for lawn maintenance. This model is known for its robust performance, user-friendly features, and innovative technologies that make mowing a breeze.

One of the standout features of the Craftsman 917.271742 is its powerful engine. It is equipped with a 24 HP Briggs & Stratton V-Twin engine that provides significant power and efficiency. This engine ensures that the tractor can handle various terrains, from flat lawns to slightly hilly landscapes, without any struggle. The V-Twin design allows for smoother operation and reduced noise, making mowing less of a chore.

The mower deck of the Craftsman 917.271742 is another notable characteristic. With a cutting width of 54 inches, it allows for efficient mowing of larger areas in a shorter amount of time. The deck is made of heavy-duty steel, ensuring durability and longevity. Additionally, it features a deck wash system, making cleanup after mowing quick and easy. Operators can simply connect a hose to the deck wash port for a hassle-free cleaning experience.

Comfort is also a top priority in the design of the Craftsman 917.271742. The tractor comes with an ergonomic seat that is adjustable and padded, providing the user with comfort during extended mowing sessions. The steering wheel is designed for easy maneuverability, making it simple to navigate around obstacles in the yard.

Another feature that enhances the machine's usability is the hydrostatic transmission. This innovative technology allows for smooth acceleration and deceleration without the need for complicated gear shifting. As a result, operators can focus more on mowing and less on managing the transmission.

For added convenience, the Craftsman 917.271742 includes a variety of attachments and accessories. It can be outfitted with a bagger, mulching kit, or snow plow, making it a versatile tool for year-round use. The lights integrated into the front of the tractor also allow for safe mowing in low-light conditions.

In summary, the Craftsman 917.271742 lawn tractor combines power, comfort, and versatility. With its robust engine, wide mowing deck, hydrostatic transmission, and optional attachments, it offers homeowners an efficient and user-friendly solution for maintaining their lawns effectively. Whether tackling large spaces or navigating tight corners, this tractor is built to deliver optimal performance in various lawn care tasks.