Craftsman 917.271742 owner manual Install Seat, Belt Flat W

Page 9

Battery

Door

INSTALL SEAT

Adjust seat before tightening adjustment knob.

1.Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

4.Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

5.Pivot seat and pan forward and assemble adjustment knob and flat washer loosely, Do not tighten,

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its adjusted position.

9.Raise seat and tighten adjustment knob securely.

Seat

Seat Pan-_

Belt

Flat W__

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor

from the skid,

TO ROLLTRACTOR OFF SKID (See Operation section for location and function of controls)

1.Press lift lever plunger and raise attachment lift lever to its highest position.

2.Release parking brake by depressing clutch/brake pedal.

3.Place freewheel control in freewheel- ing position to disengage transmission (See "TO TRANSPORT" in the Operation section of this manual).

4.Roll tractor forward off skid.

5.Remove banding holding deflector shield up against tractor.

TO DRIVETRACTOR OFF SKID (See Operation section for location and function of controls)

_ILWARNING: Before starting, read, understand and follow all instructions in

the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of

other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and till fuel tank with gasoline.

3.Place freewheel control in "transmis-

sion engaged" position,

4.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

5.Place motion control lever in neutral

(N)position.

6.Press lift lever plunger and raise attachment lift lever to its highest

position.

7, Start the engine. After engine has started, move throttle control to idle

position.

8.Release parking brake,

9.Slowly move the motion control lever forward and slowly drive tractor off skid.

1O.Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

11.Turn ignition key to "OFF" position, Continue with the instructions that follow.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Jcrhftsmhnj Limited 90 DAY Warranty on Battery General Operation II. Slope OperationEdge of a cliff or ditch, or if an edge IV. Service IlL ChildrenMower blades are sharp and can cut Wash hands after handling Product Specificatons Steering Wheel Before Removingtractor from Skid Attach Steering Wheel Belt Flat W Install SeatInstall Mulcher Plate TlR Ammeter KnowyourtractorThrotUe/Choke ControlHowto Useyourtractor To SET Parking Brake To Adjust Mower Cutting HeightMower Blades Ground DriveTo Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportBefore Startingthe Engine Check Engine OIL Level Towing Carts and Other ATTACH- MentsADD Gasoline To Start EngineAttachments can also be used PurgetransmissionMax MowingtipsLubrication Chart General RecommendationsBefore Each USE Tractor BatteryBrake Operation TiresBelts To Clean Battery and TerminalsTransaxle Cooling Transaxle Pump FluidTo Service PRE-CLEANER Clean AIR ScreenEngine Cooling Fins AIR FilterTo Install Mower CleaningTractor To Remove MowerSIDE-TO-SIDE Adjustment To Level Mower HousingYour mower Bottom edgeofTo Adjust Brake Belt InstallationTo Replace Mower Blade Drive Belt Belt RemovalTo Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control Lever Neutral AdjustmentTo Start Engine with a Weak Battery Transmission REMOVAL/REPLACE- MentTo Replace Headlight Bulb To Remove CABLES, Reverse OrderInterlocks and Relays To Remove Hood and Grill AS- SemblyTo Adjustthrottle Control Cable To Adjust CarburetorGovernor Acceleration Test Engineoil Engine Fuel SystemCylinders OtherCorrection Troubleshooting Chart Problem CauseExcessive vibtion Troubleshooting ChartClutch engaged Remove obstructionProblemcause Tractor - Model Number SchematicElectrical KEY Part Description TRACTOR- Model Number Chassisand Enclosures TRACTOR- Model Number Chassis and Enclosures TRACTOR- Model Number Ground Drive 202 Tractor - Model Number 917.271742 Steeringassembly Tractor - Model Number 9t7.271742 Steeringassembly Spark Arrester Engine Optional EquipmentKEY Part Description TRACTOR- Model Number Seat Assembly Wheels &TIRES DecalsLiftassembly KEY Part NO. NO.DESCRIPTION Mowerdeck STD624008 TRACTOR- Model Number MowerdeckOi¢ SpacialFlange NSTRUCO.AUAL =31 F 801 92t 969A 121A Carburetor Overhaul KIT 137A 276A 95095A 117A 276A 51104A 127A 137A O010 Gear-Pinion Page Suggested Guide for Sighting Slopes for Safe Operation 877.LE.FOYER Anytime, layor night

917.271742 specifications

The Craftsman 917.271742 lawn tractor is a versatile and powerful machine designed for homeowners seeking a reliable solution for lawn maintenance. This model is known for its robust performance, user-friendly features, and innovative technologies that make mowing a breeze.

One of the standout features of the Craftsman 917.271742 is its powerful engine. It is equipped with a 24 HP Briggs & Stratton V-Twin engine that provides significant power and efficiency. This engine ensures that the tractor can handle various terrains, from flat lawns to slightly hilly landscapes, without any struggle. The V-Twin design allows for smoother operation and reduced noise, making mowing less of a chore.

The mower deck of the Craftsman 917.271742 is another notable characteristic. With a cutting width of 54 inches, it allows for efficient mowing of larger areas in a shorter amount of time. The deck is made of heavy-duty steel, ensuring durability and longevity. Additionally, it features a deck wash system, making cleanup after mowing quick and easy. Operators can simply connect a hose to the deck wash port for a hassle-free cleaning experience.

Comfort is also a top priority in the design of the Craftsman 917.271742. The tractor comes with an ergonomic seat that is adjustable and padded, providing the user with comfort during extended mowing sessions. The steering wheel is designed for easy maneuverability, making it simple to navigate around obstacles in the yard.

Another feature that enhances the machine's usability is the hydrostatic transmission. This innovative technology allows for smooth acceleration and deceleration without the need for complicated gear shifting. As a result, operators can focus more on mowing and less on managing the transmission.

For added convenience, the Craftsman 917.271742 includes a variety of attachments and accessories. It can be outfitted with a bagger, mulching kit, or snow plow, making it a versatile tool for year-round use. The lights integrated into the front of the tractor also allow for safe mowing in low-light conditions.

In summary, the Craftsman 917.271742 lawn tractor combines power, comfort, and versatility. With its robust engine, wide mowing deck, hydrostatic transmission, and optional attachments, it offers homeowners an efficient and user-friendly solution for maintaining their lawns effectively. Whether tackling large spaces or navigating tight corners, this tractor is built to deliver optimal performance in various lawn care tasks.
Top Page Image Contents