Craftsman 917.271742 To Clean Battery and Terminals, Belts, Transaxle Cooling, Engine Lubrication

Page 20

Keep battery and terminals clean.

Keep battery boris tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to "leak" power.

1.Open battery box door.

2.Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until bright.

5.Coat terminals with grease or petro- leum jelly.

6.Reinstall battery (See "REPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this

manual).

V-BELTS

Check V-belts for deterioration and wear

after 100 hours of operation and replace if necessary. The belts are not adjustable.

Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

The transmission fan and cooling fins should be kept clean to assure proper cooling.

Do not attempt to clean fan or transmis- sion while engine is running or while the transmission is hot. To prevent possible damage to seals, do not use high pressure water or steam to dean trensaxle.

Inspect cooling fan to be sure fan blades are intact and clean.

Inspect cooling fine for dirt, grass clippings and other materials. To prevent damage to seals, do not use compressed air or high pressure

sprayer to clean cooling fins.

TRANSAXLE PUMP FLUID

The tranaaxle was sealed at the factory and fluid maintenance is not required for the life of the transaxle. Should the

transaxle ever _eek or require servicing, contact your nearest authorized service center/department.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classificationSF-SJ.

Select the oil'sSAE viscosity grade

according to your expected operating temperature.

_#dE VISCOSITY GR&DES

NOTE; Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tractor is not used for 25 hours in one

year.

Check the crankcase oil level before starting the engine and after each eight

(8) hours of operation. Tighten oil fill cap/

dipstick securely each time you check the oil Level

TO CHANGE ENGINE OIL

Determine temperature range expected

before oil change. All oil must meet API service classification SF-SJ.

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

1.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

2.Remove cap from end of drain valve and install the drain tube onto the

fitting.

3.Unlock drain valve by pushing inward slightry and turning counterclockwise.

4.To open, pull out on the drain valve.

5.After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

6.Remove the drain tube and replace the cap onto to the end of the drain valve.

7.Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see

"PRODUCT SPECIFICATIONS" section of this manual.

20

Image 20
Contents Jcrhftsmhnj Limited 90 DAY Warranty on Battery Edge of a cliff or ditch, or if an edge General OperationII. Slope Operation Mower blades are sharp and can cut IV. ServiceIlL Children Wash hands after handling Product Specificatons Steering Wheel Before Removingtractor from Skid Attach Steering Wheel Install Seat Belt Flat WInstall Mulcher Plate TlR Knowyourtractor AmmeterThrotUe/Choke ControlTo Adjust Mower Cutting Height Howto Useyourtractor To SET Parking BrakeMower Blades Ground DriveTo Adjust Gauge Wheels To Operate MowerTo Operate on Hills To TransportTowing Carts and Other ATTACH- Ments Before Startingthe Engine Check Engine OIL LevelADD Gasoline To Start EnginePurgetransmission Attachments can also be usedMowingtips MaxBefore Each USE Lubrication ChartGeneral Recommendations Battery TractorBrake Operation TiresTo Clean Battery and Terminals BeltsTransaxle Cooling Transaxle Pump FluidClean AIR Screen To Service PRE-CLEANEREngine Cooling Fins AIR FilterCleaning To Install MowerTractor To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentYour mower Bottom edgeofBelt Installation To Adjust BrakeTo Replace Mower Blade Drive Belt Belt RemovalTransaxle Motion Control Lever Neutral Adjustment To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery Transmission REMOVAL/REPLACE- MentTo Remove CABLES, Reverse Order To Replace Headlight BulbInterlocks and Relays To Remove Hood and Grill AS- SemblyGovernor To Adjustthrottle Control CableTo Adjust Carburetor Acceleration Test Engine Fuel System EngineoilCylinders OtherTroubleshooting Chart Problem Cause CorrectionTroubleshooting Chart Excessive vibtionClutch engaged Remove obstructionProblemcause Schematic Tractor - Model NumberElectrical KEY Part Description TRACTOR- Model Number Chassisand Enclosures TRACTOR- Model Number Chassis and Enclosures TRACTOR- Model Number Ground Drive 202 Tractor - Model Number 917.271742 Steeringassembly Tractor - Model Number 9t7.271742 Steeringassembly Engine Optional Equipment Spark ArresterKEY Part Description TRACTOR- Model Number Seat Assembly Decals Wheels &TIRESLiftassembly KEY Part NO. NO.DESCRIPTION Mowerdeck TRACTOR- Model Number Mowerdeck STD624008Oi¢ SpacialFlange NSTRUCO.AUAL =31 F 801 92t 969A 137A 276A 950 121A Carburetor Overhaul KIT95A 117A 276A 51104A 127A 137A O010 Gear-Pinion Page Suggested Guide for Sighting Slopes for Safe Operation Anytime, layor night 877.LE.FOYER

917.271742 specifications

The Craftsman 917.271742 lawn tractor is a versatile and powerful machine designed for homeowners seeking a reliable solution for lawn maintenance. This model is known for its robust performance, user-friendly features, and innovative technologies that make mowing a breeze.

One of the standout features of the Craftsman 917.271742 is its powerful engine. It is equipped with a 24 HP Briggs & Stratton V-Twin engine that provides significant power and efficiency. This engine ensures that the tractor can handle various terrains, from flat lawns to slightly hilly landscapes, without any struggle. The V-Twin design allows for smoother operation and reduced noise, making mowing less of a chore.

The mower deck of the Craftsman 917.271742 is another notable characteristic. With a cutting width of 54 inches, it allows for efficient mowing of larger areas in a shorter amount of time. The deck is made of heavy-duty steel, ensuring durability and longevity. Additionally, it features a deck wash system, making cleanup after mowing quick and easy. Operators can simply connect a hose to the deck wash port for a hassle-free cleaning experience.

Comfort is also a top priority in the design of the Craftsman 917.271742. The tractor comes with an ergonomic seat that is adjustable and padded, providing the user with comfort during extended mowing sessions. The steering wheel is designed for easy maneuverability, making it simple to navigate around obstacles in the yard.

Another feature that enhances the machine's usability is the hydrostatic transmission. This innovative technology allows for smooth acceleration and deceleration without the need for complicated gear shifting. As a result, operators can focus more on mowing and less on managing the transmission.

For added convenience, the Craftsman 917.271742 includes a variety of attachments and accessories. It can be outfitted with a bagger, mulching kit, or snow plow, making it a versatile tool for year-round use. The lights integrated into the front of the tractor also allow for safe mowing in low-light conditions.

In summary, the Craftsman 917.271742 lawn tractor combines power, comfort, and versatility. With its robust engine, wide mowing deck, hydrostatic transmission, and optional attachments, it offers homeowners an efficient and user-friendly solution for maintaining their lawns effectively. Whether tackling large spaces or navigating tight corners, this tractor is built to deliver optimal performance in various lawn care tasks.