HOW TO SET UP YOUR TRACTOR CHECKBATTERY
•Liftseatpanto raisedpositionandopen batterybox door.
•If this battery is put into service after
month and year indicated on label (label located between terminals) charge bat- tery for minimum of one hour at
Label
Battery
Terminal
INSTALL SEAT
Adjust seat before tightening adjustment knob.
•Remove cardboard pecking on seat pan. Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.
washer loosely. Do not tighten.
i ssemble adjustment knob and fiat
Lower seat into operating position and sit on seat.
•Slide seat until a comfortable position is reached which allows you to press
clutch/brake pedal all the way down,
•Get off seat without moving its adjusted Ipositlon.
•Raise seat and tighten adjustment knob securely.
Seat
Seat Pan
Shoulder Bolt
Adjustment
KnobFlat
Washer
CHECK TIRE PRESSURE
The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.
•Reduce tire pressure to PSI shown in =PRODUCT SPECIFICATIONS" section
of this manual.
CHECK DECK LEVELNESS
For best cutting results, mower housing
should be propedy leveled. See =TO
LEVEL MOWER HOUSING" in the Service
and Adjustments section of this manual.
9