Problems and Remedies

Why is there no sound from the speakers?

-Is the AC power live? You should see a faint red glow around the Power button even when the unit is turned off.

-Check that input and output cables are secure at both ends.

-Make sure your P 5 is switched to the correct input.

-Make sure your power amplifier is powered on.

The P 5 won’t turn on

-Make sure the rear panel Turn On Options Switch is set to the Manual position.

-Make sure the rear panel master power switch is turned on.

-Make sure the unit is plugged into a live AC receptacle

The P 5 won’t turn off

- Make sure the rear panel Turn On Options Switch is set to the Manual position.

I can hear a background hum from the speakers

-Read the section on ground loops in this manual.

-Move audio cables and AC cords away from each other (while power is off).

-Try to route audio cables and AC cords perpendicular to each other (while power is off).

-Make sure insulating shoulder washers are used if unit is rack mounted.

-Insure that the power amps and the P 5 are plugged into the same AC outlet.

-Try unplugging the incoming Cable TV line. If the noise goes away you need a cable TV ground isolator.

-Try plugging your subwoofer into the same outlet as the P 5 and power amp.

-The turntable ground wire must be attached to the GND terminal.

The sound is distorted and weak

-Make sure the gain of the power amp is not set too low.

-Are you trying to use P 5 with a turntable? Make sure you have set the phono selector switch to the correct cartridge type. Is the turntable's tracking force adjusted correctly for its cartridge?

-Make sure the stereo power amp’s stereo/mono switch is set to stereo.

When I use the Bypass Input the sound is very loud and cannot be turned down.

The Bypass input should never be connected directly to a source component (CD, DVD, Tape deck, etc.). It should only be used in conjunction with a surround sound receiver or controller. The volume control on the surround sound equipment should be used to adjust the volume level when the P 5 Bypass input is selected.

What is the Bypass Input?

The Bypass input jacks are used to incorporate the P 5 into a surround sound system. This enables you to use the power amplifier (or two channels of a multi-channel amp) driving your Left and Right front speakers and subwoofer(s) with stereo sources connected to the P 5 and with your surround sound system.

P 5 specifications

Parasound has long been synonymous with high-quality audio equipment, and the Parasound P 5 is a prime example of their commitment to design and performance. This stereo preamplifier not only showcases the brand's engineering prowess but also embodies a range of features that cater to audiophiles and casual listeners alike.

At the core of the Parasound P 5 is its exceptional audio quality, which is achieved through a meticulously designed circuitry. The preamplifier features an ultra-low distortion design that ensures clarity and detail in every note. The use of high-quality components further enhances its performance, allowing it to deliver a natural and engaging listening experience. The P 5 is equipped with a robust power supply that ensures sufficient energy delivery, effectively minimizing noise and interference.

One of the standout features of the P 5 is its versatility. It offers multiple input options, including balanced XLR inputs, unbalanced RCA inputs, and a dedicated phono input for connecting turntables. This makes it an ideal choice for those looking to integrate various audio sources, including digital and analog devices. The preamplifier also includes a high-quality AD/DA converter, allowing for digital signal processing and connection to modern digital audio sources.

Additionally, the P 5 supports both low- and high-impedance headphones through its built-in headphone amplifier. This allows users to enjoy their favorite music privately without sacrificing audio quality, making the device suitable for both dedicated audio systems and personal listening experiences.

Another hallmark of the Parasound P 5 is its user-friendly design. The front panel features an intuitive layout with a large, easy-to-read display. The inclusion of remote control functionality provides convenience, enabling users to adjust settings from a distance without missing a beat in their audio enjoyment.

The P 5 also places a strong emphasis on future-proofing with features like the ability to upgrade the internal board, allowing for potential enhancements as technology evolves. This forward-thinking approach ensures that the preamplifier remains relevant in the ever-changing landscape of audio technology.

In conclusion, the Parasound P 5 stereo preamplifier stands out not only for its superb sound quality and versatility but also for its thoughtful design and user-oriented features. Whether for a home theater setup or a dedicated two-channel audio system, the P 5 is poised to deliver an exceptional auditory experience that satisfies even the most discerning listeners. With Parasound’s reputation for reliability and performance, the P 5 is a worthy investment for anyone serious about audio reproduction.