Parasound P 5 RCA line level Input Jacks inputs, XLR Balanced Input input, Front Panel Aux Input

Page 7

Analog Audio Input Connections (Continued)…

RCA line level Input Jacks (inputs 1-5)

Source inputs 1–5 all have the same input sensitivity and input impedance and they are compatible with any typical analog line level source.

Note: Input 5 is shared with the XLR balanced input, therefore the RCA and XLR jacks for input 5 should not be connected at the same time.

XLR Balanced Input (input 5)

Input 5 uses balanced XLR type jacks. Use this input to connect an analog source which has balanced outputs. A balanced line provides superior hum and noise cancellation, especially for long cable runs.

Note: Input 5 is shared with the XLR balanced input, therefore the RCA and XLR jacks for input 5 should not be connected at the same time.

Front Panel Aux Input

For your convenience there is an input jack on the front panel for a portable MP3 player (or smart phone). Connect the included cable with 3.5mm stereo plugs between the portable player or smart phone’s headphone jack and the P 5’s Aux input jack. The Aux input has an additional gain stage that boosts the input signal by 12dB so that the volume level remains consistent when you select your other source components. For the best result set your portable player’s volume to at least 75% of its maximum level.

Note: If you connect a component other than a portable MP3 player to the Aux Input jack, the volume level will probably be too high and possibly distorted.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OWNER’S Guide Important Safety Instructions Table of Contents Introduction Placement Guidelines Unpacking Your P 5 & Placement GuidelinesVentilation Requirements Analog Audio Input Connections Phono Load/Cartridge SwitchPhono Input XLR Balanced Input input RCA line level Input Jacks inputsFront Panel Aux Input Home Theater Bypass Input Connecting the Bypass InputSelecting the Bypass Input Coax Coaxial Using a Blu-ray or DVD Players Digital OutputDigital Inputs OPT, COAX, USB Opt OpticalRecord Out Jacks Audio Output ConnectionsLeft and Right Main Output Jacks Balanced and Unbalanced Subwoofer Outputs Balanced and UnbalancedMain and Subwoofer Crossover Setup Subwoofer SetupNo subwoofer Crossover On/Off SwitchesWhere to start with Crossover settings Crossovers and the Bypass Input12V Position Automatic on/off AC Power TriggerTurn On Options Manual PositionIR Loop Output AC Power CordOther Rear Panel Connections IR InputFront Panel Controls Balance Knob Volume KnobInput Knob Sub Level KnobTone On and Off Buttons Remote Control FunctionsVolume and Buttons On and Off ButtonsMaintaining Your P Problems and Remedies Are You Having Difficulty? Repair or ServiceRatio Phono Inputs SpecificationsParasound Products, Inc McKinnon Ave, San Francisco, CA

P 5 specifications

Parasound has long been synonymous with high-quality audio equipment, and the Parasound P 5 is a prime example of their commitment to design and performance. This stereo preamplifier not only showcases the brand's engineering prowess but also embodies a range of features that cater to audiophiles and casual listeners alike.

At the core of the Parasound P 5 is its exceptional audio quality, which is achieved through a meticulously designed circuitry. The preamplifier features an ultra-low distortion design that ensures clarity and detail in every note. The use of high-quality components further enhances its performance, allowing it to deliver a natural and engaging listening experience. The P 5 is equipped with a robust power supply that ensures sufficient energy delivery, effectively minimizing noise and interference.

One of the standout features of the P 5 is its versatility. It offers multiple input options, including balanced XLR inputs, unbalanced RCA inputs, and a dedicated phono input for connecting turntables. This makes it an ideal choice for those looking to integrate various audio sources, including digital and analog devices. The preamplifier also includes a high-quality AD/DA converter, allowing for digital signal processing and connection to modern digital audio sources.

Additionally, the P 5 supports both low- and high-impedance headphones through its built-in headphone amplifier. This allows users to enjoy their favorite music privately without sacrificing audio quality, making the device suitable for both dedicated audio systems and personal listening experiences.

Another hallmark of the Parasound P 5 is its user-friendly design. The front panel features an intuitive layout with a large, easy-to-read display. The inclusion of remote control functionality provides convenience, enabling users to adjust settings from a distance without missing a beat in their audio enjoyment.

The P 5 also places a strong emphasis on future-proofing with features like the ability to upgrade the internal board, allowing for potential enhancements as technology evolves. This forward-thinking approach ensures that the preamplifier remains relevant in the ever-changing landscape of audio technology.

In conclusion, the Parasound P 5 stereo preamplifier stands out not only for its superb sound quality and versatility but also for its thoughtful design and user-oriented features. Whether for a home theater setup or a dedicated two-channel audio system, the P 5 is poised to deliver an exceptional auditory experience that satisfies even the most discerning listeners. With Parasound’s reputation for reliability and performance, the P 5 is a worthy investment for anyone serious about audio reproduction.
Top Page Image Contents