Parasound manual Unpacking Your P 5 & Placement Guidelines, Ventilation Requirements

Page 5

Unpacking Your P 5 & Placement Guidelines

Unpacking Your P 5

Carefully remove your P 5 from its shipping carton and locate the enclosed accessories:

•AC power cord

•Two trigger wires, one with mono 3.5 mm mini plugs, one with a mono 2.5mm sub-mini plug and a mono 3.5mm mini plug

•Remote Control with AAA batteries

•USB A to USB B cable for music playback from a computer

•Stereo cable with stereo 3.5mm mini plugs for using the front panel AUX input

While you are unpacking your P 5, inspect it thoroughly for possible shipping damage and tell your Parasound dealer immediately if you find any evidence of shipping damage. This would be a good time to make a copy of your sales receipt to store with the P 5’s original packing.

Note: Please save and store both the inner and outer cartons and, most especially, the foam packing inserts to protect the P 5 if you have to move it or ship it. You may wish to flatten the cardboard cartons to save room in storage after cutting the taped seams on the bottom flaps.

Placement Guidelines

The P 5 will be easier to use and will last longer if you follow these simple guidelines:

•Use input and output cables that are long enough to leave some slack; that will enable you to pull the P 5 out of a cabinet to check or to change connections without inadvertently disconnecting cables.

•Place your P 5 where you can route input and output signal cables as far as possible from any AC cords.

•Where signal cables must cross AC cords they should do so only at a 90° right angle.

Ventilation Requirements

•Always position the P 5 horizontally.

•The P 5 should never be stacked above a power amplifier.

•The P 5 should not be placed in a completely enclosed cabinet.

AC Mains Voltage

The P 5 will operate on AC mains voltage of 100V-240V. There is no need for any fuse or wiring changes to switch between 115V and 230V operation.

Rack Mounting your P 5

With its four feet removed, the P 5’s front panel height occupies two rack spaces: 3.5” or 88.2 mm. (A single standard rack space occupies 1.75” vertical space.) For mounting in a standard 19” equipment rack, you must use the Parasound HRA 2 rack mount kit (purchased separately). The HRA 2 kit includes four bolts and eight plastic washers with raised “shoulders.” Slide one washer onto each mounting bolt with its raised shoulder pointing toward the panel hole. Insert the bolt through the hole and slide the other washer on the bolt with its raised shoulder facing the rear side of the panel. The washers will sandwich the P 5 panel and the four mounting bolts to prevent metal-to-metal contact between the P 5 chassis, the equipment rack, and the other components mounted in the rack.

Warning: Do not put the screws for the feet back into the bottom of the P 5 without the feet. Doing so could cause the screws to touch electrical components and cause a short circuit.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OWNER’S Guide Important Safety Instructions Table of Contents Introduction Ventilation Requirements Unpacking Your P 5 & Placement GuidelinesPlacement Guidelines Phono Input Phono Load/Cartridge SwitchAnalog Audio Input Connections Front Panel Aux Input RCA line level Input Jacks inputsXLR Balanced Input input Selecting the Bypass Input Connecting the Bypass InputHome Theater Bypass Input Digital Inputs OPT, COAX, USB Using a Blu-ray or DVD Players Digital OutputOpt Optical Coax CoaxialLeft and Right Main Output Jacks Balanced and Unbalanced Audio Output ConnectionsSubwoofer Outputs Balanced and Unbalanced Record Out JacksMain and Subwoofer Crossover Setup Subwoofer SetupWhere to start with Crossover settings Crossover On/Off SwitchesCrossovers and the Bypass Input No subwooferTurn On Options AC Power TriggerManual Position 12V Position Automatic on/offOther Rear Panel Connections AC Power CordIR Input IR Loop OutputFront Panel Controls Input Knob Volume KnobSub Level Knob Balance KnobVolume and Buttons Remote Control FunctionsOn and Off Buttons Tone On and Off ButtonsMaintaining Your P Problems and Remedies Are You Having Difficulty? Repair or ServiceRatio Phono Inputs SpecificationsParasound Products, Inc McKinnon Ave, San Francisco, CA

P 5 specifications

Parasound has long been synonymous with high-quality audio equipment, and the Parasound P 5 is a prime example of their commitment to design and performance. This stereo preamplifier not only showcases the brand's engineering prowess but also embodies a range of features that cater to audiophiles and casual listeners alike.

At the core of the Parasound P 5 is its exceptional audio quality, which is achieved through a meticulously designed circuitry. The preamplifier features an ultra-low distortion design that ensures clarity and detail in every note. The use of high-quality components further enhances its performance, allowing it to deliver a natural and engaging listening experience. The P 5 is equipped with a robust power supply that ensures sufficient energy delivery, effectively minimizing noise and interference.

One of the standout features of the P 5 is its versatility. It offers multiple input options, including balanced XLR inputs, unbalanced RCA inputs, and a dedicated phono input for connecting turntables. This makes it an ideal choice for those looking to integrate various audio sources, including digital and analog devices. The preamplifier also includes a high-quality AD/DA converter, allowing for digital signal processing and connection to modern digital audio sources.

Additionally, the P 5 supports both low- and high-impedance headphones through its built-in headphone amplifier. This allows users to enjoy their favorite music privately without sacrificing audio quality, making the device suitable for both dedicated audio systems and personal listening experiences.

Another hallmark of the Parasound P 5 is its user-friendly design. The front panel features an intuitive layout with a large, easy-to-read display. The inclusion of remote control functionality provides convenience, enabling users to adjust settings from a distance without missing a beat in their audio enjoyment.

The P 5 also places a strong emphasis on future-proofing with features like the ability to upgrade the internal board, allowing for potential enhancements as technology evolves. This forward-thinking approach ensures that the preamplifier remains relevant in the ever-changing landscape of audio technology.

In conclusion, the Parasound P 5 stereo preamplifier stands out not only for its superb sound quality and versatility but also for its thoughtful design and user-oriented features. Whether for a home theater setup or a dedicated two-channel audio system, the P 5 is poised to deliver an exceptional auditory experience that satisfies even the most discerning listeners. With Parasound’s reputation for reliability and performance, the P 5 is a worthy investment for anyone serious about audio reproduction.
Top Page Image Contents