Parasound P 5 manual Specifications, Ratio Phono Inputs

Page 21

Specifications

Frequency Response

10 Hz - 100 kHz, +0/-3 dB

Total Harmonic Distortion

< 0.01 %

Crosstalk

> 70 dB at 20 kHz

Input Sensitivity

300 mv: 1 Volt Out

Total Gain: 10 dB

Maximum Output: 7 Volts

Input Impedance

Unbalanced: 24k Ω

Balanced: 100k Ω per leg

Output Impedance

Unbalanced: 100 Ω

Balanced: 470 Ω per leg

S/N Ratio - Line Inputs 1- 5

>108 dB, input shorted, IHF A-weighted

>88 dB, input shorted, unweighted

S/N Ratio - DAC Inputs

>108 dB, input shorted, IHF A-weighted

>90 dB, input shorted, unweighted

S/N Ratio - Phono Inputs

MM> 80 dB, input shorted, IHF A-weighted MM > 70 dB, input shorted, unweighted MC > 67 dB, input shorted, IHF A-weighted MC > 55 dB, input shorted, unweighted

Hi & Low Pass Crossover Slope

12 dB / Oct

DC Trigger Requirements

+9 Vdc to +12 Vdc, 2 mA

XLR Pin Identification

1 = Ground (Shield)

2 = Positive

3 = Negative (Return)

Dimensions

Width: 17-1/4” (437 mm)

Depth: 13-3/4” (350 mm)

Height, with feet: 4-1/8” (105 mm)

Height, without feet: 3-1/2” (89 mm)

Net Weight

14 lb. (6.3 kg)

Shipping Weight

21 lb. (9.5 kg)

Power Requirement

Standby: 0.5 Watts

Power On: 12 Watts

100-250 Volts, 50-60 Hz (Automatic)

Specifications and features subject to change or improvement without notice.

Copyright Parasound Product Inc., 2013

Rev. 1.1

www.parasound.com

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents OWNER’S Guide Important Safety Instructions Table of Contents Introduction Unpacking Your P 5 & Placement Guidelines Placement GuidelinesVentilation Requirements Phono Load/Cartridge Switch Analog Audio Input ConnectionsPhono Input RCA line level Input Jacks inputs XLR Balanced Input inputFront Panel Aux Input Connecting the Bypass Input Home Theater Bypass InputSelecting the Bypass Input Digital Inputs OPT, COAX, USB Using a Blu-ray or DVD Players Digital OutputOpt Optical Coax CoaxialLeft and Right Main Output Jacks Balanced and Unbalanced Audio Output ConnectionsSubwoofer Outputs Balanced and Unbalanced Record Out JacksMain and Subwoofer Crossover Setup Subwoofer SetupWhere to start with Crossover settings Crossover On/Off SwitchesCrossovers and the Bypass Input No subwooferTurn On Options AC Power TriggerManual Position 12V Position Automatic on/offOther Rear Panel Connections AC Power CordIR Input IR Loop OutputFront Panel Controls Input Knob Volume KnobSub Level Knob Balance KnobVolume and Buttons Remote Control FunctionsOn and Off Buttons Tone On and Off ButtonsMaintaining Your P Problems and Remedies Are You Having Difficulty? Repair or ServiceRatio Phono Inputs SpecificationsParasound Products, Inc McKinnon Ave, San Francisco, CA

P 5 specifications

Parasound has long been synonymous with high-quality audio equipment, and the Parasound P 5 is a prime example of their commitment to design and performance. This stereo preamplifier not only showcases the brand's engineering prowess but also embodies a range of features that cater to audiophiles and casual listeners alike.

At the core of the Parasound P 5 is its exceptional audio quality, which is achieved through a meticulously designed circuitry. The preamplifier features an ultra-low distortion design that ensures clarity and detail in every note. The use of high-quality components further enhances its performance, allowing it to deliver a natural and engaging listening experience. The P 5 is equipped with a robust power supply that ensures sufficient energy delivery, effectively minimizing noise and interference.

One of the standout features of the P 5 is its versatility. It offers multiple input options, including balanced XLR inputs, unbalanced RCA inputs, and a dedicated phono input for connecting turntables. This makes it an ideal choice for those looking to integrate various audio sources, including digital and analog devices. The preamplifier also includes a high-quality AD/DA converter, allowing for digital signal processing and connection to modern digital audio sources.

Additionally, the P 5 supports both low- and high-impedance headphones through its built-in headphone amplifier. This allows users to enjoy their favorite music privately without sacrificing audio quality, making the device suitable for both dedicated audio systems and personal listening experiences.

Another hallmark of the Parasound P 5 is its user-friendly design. The front panel features an intuitive layout with a large, easy-to-read display. The inclusion of remote control functionality provides convenience, enabling users to adjust settings from a distance without missing a beat in their audio enjoyment.

The P 5 also places a strong emphasis on future-proofing with features like the ability to upgrade the internal board, allowing for potential enhancements as technology evolves. This forward-thinking approach ensures that the preamplifier remains relevant in the ever-changing landscape of audio technology.

In conclusion, the Parasound P 5 stereo preamplifier stands out not only for its superb sound quality and versatility but also for its thoughtful design and user-oriented features. Whether for a home theater setup or a dedicated two-channel audio system, the P 5 is poised to deliver an exceptional auditory experience that satisfies even the most discerning listeners. With Parasound’s reputation for reliability and performance, the P 5 is a worthy investment for anyone serious about audio reproduction.
Top Page Image Contents