Craftsman 917.25736 HOW to USE Your Tractor, To SET Parking Brake See Fig, Stopping See Fig

Page 11

OPEBATmON

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend Wide Vision Safety Mask for over the spectacles or standard safety glasses, available at Sears Retail or Catalog Stores

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 7)

Your unit is equipped with an operator presence sensing switch When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine

Depress clutch/brake pedal into full "BRAKE" position and hold

Place parking brake lever in "ENGAGED"position and release pressure from clutch/brake pedal Pedalshould

remain in "BRAKE" position Make sure parking brake will hold vehicle secure

ATTACHMENT

"DISENGAGED"

1

CLUTCH

LEVER

POSITION

"ENGAGED"

MOTION

 

POSITION

_

CONTROLLEVER

IGNITION

 

 

 

KEY

THROTTL_

CHOKE

CONTROL,

STOPPING (See Fig. 7)

MOWER BLADES -

Move attachment clutch lever to "DISENGAGED" position

GROUND DRIVE -

Depress clutch/brake pedal intofull "BRAKE" position

Move motion control lever to "NEUTRAL" position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO "NEUTRAL" POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED

ENGINE -

Move throttle control to "SLOW" position

Turn ignition key to "OFF" position and remove key.

Always remove key when leaving vehicle to prevent unauthorized use.

Never use choke to stop engine

TO USE THROTTLE CONTROL (See Fig. 7)

Always operate engine at full throttle

Operating engine at less than full throttle reduces the battery charging rate and the engine cooling air flow

Full throttle offers the best bagging and mower per- formance

TO MOVE FORWARD AND BACKWARD (See Fig. 6)

The direction and speed of movement is controlled by the motion control lever,

Start unit with the motion control lever in "NEUTRAL" position

Release parking brake and clutch/brake pedal.

Slowly move motion control lever to desired position

PARKING BRAKE "ENGAGED"

POSITION

"BRAKE"

POSITION"DISENGAGED"

POSITION

CLUTCH/BRAKE

PEDAL"DRIVE"

POSITION

FIG. 7

TO ADJUST MOWER CUTTING HEIGHT (See

Fig. 6)

The position of the attachment lift lever determines the cutting height

Grasp lift lever

Press plunger with thumb and move lever to desired position

The cutting height range is approximately 1-I/4" to 3-3/4".

The heights are measured from the ground to the blade t p with the engine not running These heights are approxi- mate and may vary depending upon soil conditions, height of grass and types of grass being mowed

The average lawn should be cut approximately 2-1/2 inches during the cool season and over 3 inches during hot months For healthier and better looking lawns, mow often and after moderate growth

For best cutting performance, grass over 6 inches in height should be mowed twice Make the first cut

relatively high; the second to desired height.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Automatic Hydrostatic Lawn Tractor Operation Maintenance and StoragePreparation Customer Responsibilities Maintenance AgreementProduct Specifications Full 90 DAY Warranty on BatteryIndex Performance EngineContents of Hardware Pack Before Rolling Unit OFF Skid AssemblyTools Required for Assembly To Remove Unit from CartonCheck Brake System HOW to SET UP Your TractorPrepare Battery See Fig Check for Proper Position of ALL BeltsInstall Battery See Figs ChecklistKnow Your Tractor OperatuoTo USE Throttle Control See Fig HOW to USE Your TractorTo SET Parking Brake See Fig Stopping See FigCheck Engine OIL Level See Fig OperationTo Operate Mower See Fig Important the Motioncontrollever doesMowing Tips Lubrication MaintenanceGeneral Recommendations Before Each USEWell Battery See FigTractor Blade CareRecommended SAE Viscosity Grades Transaxle Pump Fluid Level See FigsMuffler AIR Filter See FigAIR Screen See Fig Spark Plugs See Fig Servuce and AdjustmentsCleaning AINTENANC£NUT E Ervice and AdjustmentsTo Level Mower Housing OfcurlBelt Removal Service and AdjustmentsTo Adjust Mower Blade Drive Belt Belt InstallationTo Replace Motion Drive Belt See Figs To Adjust Brake See FigTo Adjust Steering Wheel Alignment ServiceAdjustments To Adjust Motion Control Lever See FigTo Replace Headlight Bulb Interlocks and RelaysTo Remove CABLES, Reverse Order To Remove Hood and Grill Assembly Servnce and AdjustmentsGoverned Idle To Adjust Throttle Control Cable See FigFinal Setting EngineFuel System BatteryStorage OtherTroubleshootbng Pounts Problem Cause CorrectionProblem Cause Correction Troubleshooting PointsSchematic Repaur Parts Standard Hardware - Purchase Locally @12KEY Part Description =.-== Mmommmmommbmml I J J j J J J J J Repair Parts Description 12 HP 38 Riding Lawn Tractor - Model Number DriveKEY Part KEY553O C D KEY Part DescriptionTractor - Model Number 12 HP 38 Riding LawnStandard Hardware - Purchase Locally C D E REPAnR Parts C D E F G H J K L Part KEY Description16x3/4 STD541437 Nut 16UNC Part Description Repair PartsN44 Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 4751 EY Part KEY Description =IEPAIR PartsT41 Qil KEY Part NO. no DescriptionGasketset Repair PartsKEY Part NO. no Label KITSlope Sheet PRINTE3 in U S HOW to Order Repair Parts12,0 HP MC Electric Start 38 Mower

917.25736 specifications

The Craftsman 917.25736 is a standout model in the realm of lawn tractors, offering remarkable performance and versatility for homeowners with medium to large lawns. Engineered to provide an efficient mowing experience, this lawn tractor is perfect for those seeking both power and reliability.

One of the key features of the Craftsman 917.25736 is its robust engine. Equipped with a 19.5 HP Briggs & Stratton engine, this tractor offers ample power to tackle tough mowing tasks. The engine is designed for durability and efficiency, ensuring that users can depend on it for consistent performance season after season.

The cutting deck is another significant highlight of the Craftsman 917.25736. It boasts a 42-inch steel cutting deck that not only provides a wide cutting path but also enhances durability and effectiveness. The adjustable cutting height offers six different positions, allowing users to customize their mowing experience based on their lawn's specific needs.

In terms of technology, the Craftsman 917.25736 features a hydrostatic transmission that delivers smooth and seamless operation. This means users can easily control their speed without the need for manual gear shifting, making it more accessible for individuals of all skill levels. The tight turning radius also allows for better maneuverability around obstacles like trees and flower beds.

The comfort of the operator has not been overlooked in the design of the Craftsman 917.25736. It comes with a plush, high-back seat that provides ample support during long mowing sessions. Additionally, the steering wheel is ergonomically designed, making it easier to handle the tractor over extended periods.

For those concerned about the safety features, this model does not disappoint. The tractor comes with a safety ignition switch that prevents accidental starting, as well as automatic shut-off features that engage when the operator leaves the seat, enhancing its safety profile significantly.

Overall, the Craftsman 917.25736 combines powerful performance, user-friendly technology, and comfort, making it an ideal choice for homeowners looking to maintain their lawns efficiently. With its thoughtful design and reliable features, it stands as a testament to Craftsman’s commitment to quality and innovation in outdoor power equipment. Whether you are mowing a large expanse or navigating tight corners, the Craftsman 917.25736 aims to deliver a dependable and enjoyable mowing experience.
Top Page Image Contents