Craftsman 917.25736 owner manual Storage, Other, Battery, Fuel System, Engine OIL

Page 26

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the unit will not be used for 30 days or more

CAUTION: Never store the tractor with

gasoline in the tank inside a building where fumes may reach an open flame

or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage When mower is to be stored for e period of time, clean it thor-

oughly, remove all dirt, grease, leaves, etc Give blades and underside of housing a good coat of grease or rust

preventative. Store in a clean, dry area.

Clean entire tractor (See "CLEANING" in the Mainte- nance section of this manual)

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear Replace if necessary

Touch up all rusted or chipped paint sudaces: sand lightly before painting

BATTERY

Fully charge the battery for storage

After a period of time in storage, battery may require recharging

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO CLEAN BATTERY AND TERMINALS" in the Mainte-

nance sectioin of this manual)

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals

Be sure battery drain tube Jssecurely attached to drain in battery tray

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSEN- TIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT

ALCOHOL BLENDED FUELS (CALLED

GASOHOL OR USING ETHANOL OR

METHANOL) CAN ATTRACT MOISTURE

WHICH LEADS TO SEPARATION AND

FORMATION OFACIDS DURING STOR-

AGE ACIDIC GAS CAN DAMAGE THE

FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Drain the fuel tank

Start the engine and let it run until the fuel lines and carburetor are empty,

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during stor- age_ Add stabilizer to gasoline in fuel tank or storage container Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil (See"ENGINE" intheMaintenancesectionofthisman- ual)

CYLINDERS

Remove spark plug(s)

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to "START" position for a few seconds to distribute oil

Replace with new spark plug(s)

OTHER

Do not store gasoline from one season to another

Replace your gasoline can if your can starts to rust Rust and/or dirt in your gasoline will cause problems,

If possible, store your unit indoors and cover it to give protection from dust and dirt.

Cover your unit with a suitable protective cover that does not retain moisture_ Do not use plastic. Plastic cannot breath which allows condensation to form and will cause your unit to rust

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Automatic Hydrostatic Lawn Tractor Operation Maintenance and StoragePreparation Full 90 DAY Warranty on Battery Maintenance AgreementProduct Specifications Customer ResponsibilitiesIndex Engine PerformanceContents of Hardware Pack To Remove Unit from Carton AssemblyTools Required for Assembly Before Rolling Unit OFF SkidCheck for Proper Position of ALL Belts HOW to SET UP Your TractorPrepare Battery See Fig Check Brake SystemChecklist Install Battery See FigsOperatuo Know Your TractorStopping See Fig HOW to USE Your TractorTo SET Parking Brake See Fig To USE Throttle Control See FigImportant the Motioncontrollever does OperationTo Operate Mower See Fig Check Engine OIL Level See FigMowing Tips Before Each USE MaintenanceGeneral Recommendations LubricationBlade Care Battery See FigTractor WellTransaxle Pump Fluid Level See Figs Recommended SAE Viscosity GradesMuffler AIR Filter See FigAIR Screen See Fig AINTENANC£ Servuce and AdjustmentsCleaning Spark Plugs See FigOfcurl Ervice and AdjustmentsTo Level Mower Housing NUT EBelt Installation Service and AdjustmentsTo Adjust Mower Blade Drive Belt Belt RemovalTo Adjust Brake See Fig To Replace Motion Drive Belt See FigsTo Adjust Motion Control Lever See Fig ServiceAdjustments To Adjust Steering Wheel AlignmentTo Replace Headlight Bulb Interlocks and RelaysTo Remove CABLES, Reverse Order Servnce and Adjustments To Remove Hood and Grill AssemblyEngine To Adjust Throttle Control Cable See FigFinal Setting Governed IdleOther BatteryStorage Fuel SystemProblem Cause Correction Troubleshootbng PountsTroubleshooting Points Problem Cause CorrectionSchematic Repaur Parts Standard Hardware - Purchase Locally @12KEY Part Description =.-== Mmommmmommbmml I J J j J J J J J Repair Parts KEY 12 HP 38 Riding Lawn Tractor - Model Number DriveKEY Part Description553O KEY Part Description C D12 HP 38 Riding Lawn Tractor - Model NumberStandard Hardware - Purchase Locally C D E REPAnR Parts Part KEY Description C D E F G H J K L16x3/4 STD541437 Nut 16UNC Repair Parts Part DescriptionN44 Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 4751 =IEPAIR Parts EY Part KEY DescriptionT41 KEY Part NO. no Description QilLabel KIT Repair PartsKEY Part NO. no GasketsetSlope Sheet PRINTE3 in U S HOW to Order Repair Parts12,0 HP MC Electric Start 38 Mower

917.25736 specifications

The Craftsman 917.25736 is a standout model in the realm of lawn tractors, offering remarkable performance and versatility for homeowners with medium to large lawns. Engineered to provide an efficient mowing experience, this lawn tractor is perfect for those seeking both power and reliability.

One of the key features of the Craftsman 917.25736 is its robust engine. Equipped with a 19.5 HP Briggs & Stratton engine, this tractor offers ample power to tackle tough mowing tasks. The engine is designed for durability and efficiency, ensuring that users can depend on it for consistent performance season after season.

The cutting deck is another significant highlight of the Craftsman 917.25736. It boasts a 42-inch steel cutting deck that not only provides a wide cutting path but also enhances durability and effectiveness. The adjustable cutting height offers six different positions, allowing users to customize their mowing experience based on their lawn's specific needs.

In terms of technology, the Craftsman 917.25736 features a hydrostatic transmission that delivers smooth and seamless operation. This means users can easily control their speed without the need for manual gear shifting, making it more accessible for individuals of all skill levels. The tight turning radius also allows for better maneuverability around obstacles like trees and flower beds.

The comfort of the operator has not been overlooked in the design of the Craftsman 917.25736. It comes with a plush, high-back seat that provides ample support during long mowing sessions. Additionally, the steering wheel is ergonomically designed, making it easier to handle the tractor over extended periods.

For those concerned about the safety features, this model does not disappoint. The tractor comes with a safety ignition switch that prevents accidental starting, as well as automatic shut-off features that engage when the operator leaves the seat, enhancing its safety profile significantly.

Overall, the Craftsman 917.25736 combines powerful performance, user-friendly technology, and comfort, making it an ideal choice for homeowners looking to maintain their lawns efficiently. With its thoughtful design and reliable features, it stands as a testament to Craftsman’s commitment to quality and innovation in outdoor power equipment. Whether you are mowing a large expanse or navigating tight corners, the Craftsman 917.25736 aims to deliver a dependable and enjoyable mowing experience.
Top Page Image Contents