Palsonic PRC-241 instruction manual CD Programmed Play, Tips for Good Radio Reception

Page 6

CD PROGRAMMED PLAY

This function allows the tracks to be played in a programmed sequence.

1.Press the Program Button (#21) once. The CD Program Indicator (#27) will flash and the LED Track Display (#20) will display "0" and blink.

2.Press the CD Skip Forward Button (#17) or CD Skip Backward Button (#16) to select the song to be programmed.

3.Press the Program Button (#21) again to store selection. The CD Program Indicator (#27) will flash and the LED Track Display (#20) will go to "0" and blink.

4.Press the CD Skip Forward Button (#17) or CD Skip Backward Button (#16) to select the next song to be programmed and press the Program Button to store selection.

5.You may repeat steps #1- #4 to program as many as 19 tracks. If you attempt to program more than 19 tracks, the LED Track Display (#20) will display "--" instead.

6.To check the programmed tracks, press Program Button (#21). The LED Track Display (#20) will display the track number. Press Program Button (#21) more times to check the following tracks.

7.Press CD Play Button (#23) to start playing in the programmed sequence.

8.To cancel programmed play, press the CD Stop Button (#22).

RADIO RECEPTION

1.Set the Function Selector (#1) to "RADIO" position.

2.Set the Band Selector (#6) to "AM" or "FM" for the desired radio band.

3.Adjust the Tuning Knob (#7) to select the desired radio station.

4.Adjust the Volume Control (#14) to obtain the desired sound level from the Dynamic Speakers (#15).

5.When you wish to turn off the Radio, set the Function Selector (#1) to the "TAPE" position.

TIPS FOR GOOD RADIO RECEPTION

1.To insure maximum FM tuner sensitivity, the Telescopic Antenna (#2) should be fully extended and rotated to obtain the best possible reception. The FM Stereo Indicator (#28) will light steadily when a stereo program is being received.

2.When tuning in AM reception, be sure to place the unit in a vertical position. To insure best AM sensitivity, try repositioning the unit until the best reception is obtained.

CASSETTE RECORDER OPERATION

1.Open the Cassette Door (#24) and insert a pre-recorded cassette tape with the exposed tape facing upwards. Close the Cassette Door (#24).

2.Press the Cassette Play Button (#19) and adjust the Rotary Volume Control (#14) to obtain the desired sound level.

3.Press Cassette Pause Button (#13) to suspend play. Press same button again to resume.

4.Press the Cassette Fast Forward Button (#11) or the Cassette Rewind Button (#10) to rapidly advance or rewind the tape.

5.Press the Cassette Record Button (#8) to record from either Radio, Dynamic Built-in Condenser (#29) or CD. Use Function Selector (#1) to choose your signal source accordingly.

6.Press the Cassette Stop Button (#12) to stop operation.

5

Image 6
Contents PRC-241 Safety Instructions On Placement On Protection Against Laser Energy ExposureOn Condensation Function and ControlsPower Source CD Player OperationTips for Good Radio Reception CD Programmed PlayRadio Reception Cassette Recorder OperationUsing Headphone not Included Automatic StopCassette Tape Operating Tips Care and Maintenance ServiceTrouble Shooting Guide Technical Specifications Palsonic Customer Service Telephone