Craftsman 486.24516 manual Deck Adapter, Lock Nuts, Nylon Mower Deck Washers

Page 17

Position the adapter over the deck opening, and check for fit of cutout as shown in figure 30. Trim cutout, if necessary, to allow tilting of adapter,

keeping the fit as close as possible for best vacuum suction.

NOTE: Make sure adapter clears gauge wheels on mower deck

_

DECK ADAPTER

Curl on deck may be located outside of adapter or inside depending on deck opening design

FIGURE 30

.

Holding the adapter bracket and the deck adapter together, position the deck adapter on the mower deck. Keeping the edge of deck adapter as close as possible to the offset in the adapter bracket, see if the slot in the adapter bracket can be aligned with one or two of the deflector holes in your mower deck'sdischarge opening. If the bracket can not be located correctly using existing holes, it will be necessary to drill one or two 5/16" diameter holes in the deck. See figure 31.

Use existing holes or drill 5116" diameter hole or holes.

ADAPTER BRACKET

DECK ADAPTER

MOWER DECK

Keep edge of adapter as close as possible to offset in bracket

FIGURE 31

•Assemble the adapter bracket to the deck using two 5/16" x 1" hex bolts, 5/16" flat washers and 5/16" hex lock nuts. See figure 32.

NOTE: It may be necessary to use extra 5/16" flat washers to shim under the bracket next to the deck surface. Ten extra washers have been furnished as

shims. See figure 32.

,(2) 5/16" HEX

.I. LOCK NUTS

I

__-_..__-,,--- (2) 5/16" FLAT

WASHERS

ADAPTER BRACKET i_

5/16" flat washers

,,,,f_ used as needed for

5/16" x 1" HEX BOLTshims to adjust for variations in decks.

FIGURE 32

With deck adapter positioned correctly over the discharge opening, use the adapter bracket as a template and drill three 9/32" diameter holes in the top of the deck adapter. See figure 33.

Bolt deck adapter to bracket using three 1/4" x 3/4" bolts, nylon washers, 1/4" flat washers and 1/4" hex lock nuts. Nyk)n washers should be against the inside of the ddck adapter. See figure 33.

DECK ADAPTER

 

(3)I_"HEX

 

LOCK NUTS

 

ADAPTER

 

BRACKET

(3) NYLON

MOWER DECK

WASHERS

 

(3) I_"STEEL

WASHERS

 

_)l_"x 5/4"HEXBOLTS

FIGURE 33

 

Assemble end of hose and a hose clamp over the

round opening of deck adapter and tighten clamp.

GO DIRECTLY TO THE OPERATION INSTRUC-

TIONS ON PAGE 19.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Lcrrftshrni Limited Warranty on Craftsman Powered Tractor Attachments Limited Warranty on BatteryPage To Avoid Serious Injury Date of Purchase 486.24516Shown Full Size Not all parts in this list will be used for any one tractor Carton Contents Removal of Parts from Cartons Tools Required for AssemblyAssembling the VAC System HEX BoltWasher Skid PlateHEX Bolt Axletongue Lock WasherTongue 114HEX NUT Washerdumphandle Ihex NUTLock HEX Washer NUT Lock NUTTIE ROD HEX Bolt HexnutDoor Latch Left Hand Nylock NUT Nylon WasherElbow Nylon Washer Supports HEX BoltUSE PRE BOLTS, Lock Washers HEX Lock Nuts Chipper Chute Assembly Impeller housing, securing it with the three knobsHose Adapter Nozzle 25TARP StrapAssembling the Deck Adapter #62468 to the Mower Deck Lock Nuts Deck AdapterNylon Mower Deck Washers GO Directly to the Operation Instruc Tions onFor 1990 and Newer Murray Tractors with a 46 Deck For 1990 and Newer Murray Tractors with a 38 or 40 DeckTions Which are Located on Angle Bracket HEX Lock NUT Nylon Washer MountingKnow Your VAC System HOW to USE Your Chipper MAC HOW to Start Your Chipper MACHOW to Stop Your Chipper VAC Before StartingUsing the Chipper Chute Cleaning Engine MaintenanceCustomer Responsibilities Beforeeach USENylock Nuts Sharpening or Replacing Chipper BladesPossible Causes Problem62458 Tailgate Reinforcement Bracket Part QTY DescriptionSupport QT¥ Description42TRACTOR Adapter #6246843364 39 24582 3 Hinge, Poly TopHousing Assy.Inner 29-0241A Harness, Wire 731-1613 Cover, SwitchHousing Assy.Outer 712-3046 Nut, Hex Jam 5116o18Thd Spacer, Housing=CD Page Page Get it fixed, your home or ours Au Canada pour service en franais

486.24516 specifications

The Craftsman 486.24516 is a versatile lawn mower designed to cater to the needs of homeowners who seek efficiency and ease of use in lawn maintenance. This model combines robust features with innovative technologies, ensuring that it delivers outstanding performance on the job.

One of the standout features of the Craftsman 486.24516 is its powerful engine. Equipped with a reliable gas engine, it provides ample power for mowing through thick grass and tackling uneven terrain. The engine is engineered for efficiency, offering a balanced performance that ensures longevity and reduced maintenance needs over time.

The mowing deck is another key element of this model. The Craftsman 486.24516 features a wide cutting deck, which allows for a more efficient mowing process by cutting a larger swath of grass in a single pass. The adjustable height settings enhance this functionality, enabling users to customize their cutting height according to their lawn’s requirements. This is particularly useful for maintaining a healthy lawn, as different grass types may thrive at different cutting heights.

For added convenience, the Craftsman 486.24516 comes with an easy-start mechanism. This eliminates the hassle of traditional pull-start engines, allowing users to engage the mower with minimal effort. The model also includes ergonomic handles, designed for comfort and stability, ensuring that users can maneuver the mower effortlessly while reducing fatigue during extended use.

In terms of technology, the Craftsman 486.24516 incorporates advanced features that enhance usability. The mower is designed with a mulching capability, allowing grass clippings to be finely chopped and returned to the soil as natural fertilizer, promoting healthier lawn growth while reducing yard waste. Additionally, the side discharge option provides flexibility, allowing users to choose how they wish to handle clippings based on their lawn care preferences.

Durability is a hallmark of the Craftsman brand, and the 486.24516 is no exception. Constructed with high-quality materials, the mower is built to withstand the rigors of regular use. Its frame and components are designed to resist wear and tear, ensuring that the mower remains reliable throughout its lifespan.

Overall, the Craftsman 486.24516 is a dependable choice for homeowners looking to simplify their lawn care routine. With its powerful engine, adjustable cutting deck, easy-start technology, and durable construction, this lawn mower stands out as a top contender for efficient lawn maintenance.
Top Page Image Contents