Craftsman 486.24516 manual Hexnut, TIE ROD HEX Bolt, Door Latch Left Hand, Nylock NUT Nylon Washer

Page 13

Assemble a 1/4" hex nut and then a 1/4" flat washer onto each end of a tie rod. Insert the rod ends through the upper holes in the sides of the hardtop. Assemble another 1/4" flat washer and 1/4" hex nut onto each end of the tie rod. Adjust the hex nuts to make the distance between the sides approximately the same front to rear. Tighten the nuts. See figure 16.

Assemble the three hinges to the front of the hard top

using six 1/4" x 5/8" hex bolts, 1/4" flat washers, 1/4" lock washers and 1/4" hex nuts. Assemble the bolts

and flat washers from the bottom. See figure 16.

1/4" HEXNUT

\

114"FLAT 1/4" HEXNUT 114"LOCK \

WASHER / WASHER\ .

1,4"H X.'UT1,44J 1HI.O

x/+

TIE ROD

HEX BOLT

FIGURE 16

Assemble the right hand and left hand door latches to the back of the hard top using two 5/16" x 3/4" hex bolts, nylon washers and 5/16" nylock nuts. Place the nylon washer beneath the door latch. Tighten so that the latch is snug but wifl still rotate. See figure 17.

POLY HARDTOP

DOOR LATCH

(LEFT HAND)

Place a 3/8" flat washer onto the end of the right prop rod and insert the rod into the lower hole in the side of

the hardtop. Assemble a 3/8" flat washer and a 3/8" hex lock nut onto the rod on the outside of the hard top. Tighten the nut and then loosen 1/2 turn. See figure 18. Repeat for the left prop rod.

\

3/8" H_

LOCK NUT

#

FIGURE 18

Lower the hard top. If it does not fit down easily into the "Z" brackets, adjust the width of the hardtop by adjusting the nuts on the tie rod. See figure 19.

Screw a 1/4" hex nut approximately half way onto a 1/4" x 1" hex bolt. Insert the bolt into the hole in the side of the cart as shown in figure 19. Fasten the bolt to the cart using a 1/4" lock washer and 1/4" hex nut. Tighten so that the nut is even with the end of the

bolt, Repeat on the other side. See figure 19.

\

5/16" NYLOCK NUT

NYLON WASHER

5/16" x 3/4"

HEX BOLT

DOOR LATCH

(RIGHT HAND)

FIGURE 17

114" LOCK

WASHER

114" HEX NUT

Mount the hard top to the cart by inserting the hinges into the slots in the front panel of the cart, See figure

18.

FIGURE 19

13

Image 13
Contents Lcrrftshrni Limited Warranty on Craftsman Powered Tractor Attachments Limited Warranty on BatteryPage To Avoid Serious Injury Date of Purchase 486.24516Shown Full Size Not all parts in this list will be used for any one tractor Carton Contents Removal of Parts from Cartons Tools Required for AssemblyAssembling the VAC System HEX BoltWasher Skid PlateHEX Bolt Axletongue Lock WasherTongue 114HEX NUT Washerdumphandle Ihex NUTLock HEX Washer NUT Lock NUTTIE ROD HEX Bolt HexnutDoor Latch Left Hand Nylock NUT Nylon WasherUSE PRE BOLTS, Lock Washers HEX Lock Nuts Supports HEX BoltElbow Nylon Washer Chipper Chute Assembly Impeller housing, securing it with the three knobsHose Adapter Nozzle 25TARP StrapAssembling the Deck Adapter #62468 to the Mower Deck Lock Nuts Deck AdapterNylon Mower Deck Washers GO Directly to the Operation Instruc Tions onFor 1990 and Newer Murray Tractors with a 46 Deck For 1990 and Newer Murray Tractors with a 38 or 40 DeckTions Which are Located on Angle Bracket HEX Lock NUT Nylon Washer MountingKnow Your VAC System HOW to USE Your Chipper MAC HOW to Start Your Chipper MACHOW to Stop Your Chipper VAC Before StartingUsing the Chipper Chute Cleaning Engine MaintenanceCustomer Responsibilities Beforeeach USENylock Nuts Sharpening or Replacing Chipper BladesPossible Causes Problem62458 Tailgate Reinforcement Bracket Part QTY DescriptionSupport QT¥ Description42TRACTOR Adapter #6246843364 39 24582 3 Hinge, Poly TopHousing Assy.Inner 29-0241A Harness, Wire 731-1613 Cover, SwitchHousing Assy.Outer 712-3046 Nut, Hex Jam 5116o18Thd Spacer, Housing=CD Page Page Get it fixed, your home or ours Au Canada pour service en franais

486.24516 specifications

The Craftsman 486.24516 is a versatile lawn mower designed to cater to the needs of homeowners who seek efficiency and ease of use in lawn maintenance. This model combines robust features with innovative technologies, ensuring that it delivers outstanding performance on the job.

One of the standout features of the Craftsman 486.24516 is its powerful engine. Equipped with a reliable gas engine, it provides ample power for mowing through thick grass and tackling uneven terrain. The engine is engineered for efficiency, offering a balanced performance that ensures longevity and reduced maintenance needs over time.

The mowing deck is another key element of this model. The Craftsman 486.24516 features a wide cutting deck, which allows for a more efficient mowing process by cutting a larger swath of grass in a single pass. The adjustable height settings enhance this functionality, enabling users to customize their cutting height according to their lawn’s requirements. This is particularly useful for maintaining a healthy lawn, as different grass types may thrive at different cutting heights.

For added convenience, the Craftsman 486.24516 comes with an easy-start mechanism. This eliminates the hassle of traditional pull-start engines, allowing users to engage the mower with minimal effort. The model also includes ergonomic handles, designed for comfort and stability, ensuring that users can maneuver the mower effortlessly while reducing fatigue during extended use.

In terms of technology, the Craftsman 486.24516 incorporates advanced features that enhance usability. The mower is designed with a mulching capability, allowing grass clippings to be finely chopped and returned to the soil as natural fertilizer, promoting healthier lawn growth while reducing yard waste. Additionally, the side discharge option provides flexibility, allowing users to choose how they wish to handle clippings based on their lawn care preferences.

Durability is a hallmark of the Craftsman brand, and the 486.24516 is no exception. Constructed with high-quality materials, the mower is built to withstand the rigors of regular use. Its frame and components are designed to resist wear and tear, ensuring that the mower remains reliable throughout its lifespan.

Overall, the Craftsman 486.24516 is a dependable choice for homeowners looking to simplify their lawn care routine. With its powerful engine, adjustable cutting deck, easy-start technology, and durable construction, this lawn mower stands out as a top contender for efficient lawn maintenance.