Craftsman 486.24516 manual

Page 3

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment.

•Read and follow all instructions in this manual before attempting to assemble or operate this equipment. Failure to comply with these instructions may result in personal injury. Keep this manual in a safe place for future reference and for ordering replacement parts.

•Read this operating and service instruction manualcarefully. Be thoroughly familiar with the controls and proper use of this power vacuum.

•Read the vehicle owners manual and vehicle safe operation rules before using this equipment.

•Never allow children under 16 to operate this Chipper Vac. Children 16 years and older should only operate under close parental supervision.

•Do not allow anyone to operate this equipment without proper instructions.

•Do not allow passengers to ride on this equipment or on the towing vehicle.

•Keep the area of operation clear of all persons, particularly small children. Also keep area clear of pets.

•Check fuel before starting,,, engine. Do not fill fuel tank indoors, or when engine is running, or while engine is hot.

Wipe off any spilled fuel before starting engine.

•Engine and muffler get hot. Do not touch! To avoid fire hazard, keep clean of debris and other accumulations.

•Never store Chipper Vac with fuel in tank. Allow engine to cool before storing in any enclosure.

•Do not change engine governor settings.

•Do not operate engine it air cleaner or cover is removed, except for adjustment. Removal of these parts could create a fire hazard.

•Before cleaning, repairing or inspecting, make certain all moving parts come to a complete stop. Disconnect spark plug wire and keep wire away from plug to prevent acciden- tal starting. Keep throttle control lever in stop position.

•If the Chipper Vac should become blocked with debris at any point, shut engine off and wait until the impeller comes to a complete stop before attempting to remove the obstruc- tion. Disconnect spark plug wire to prevent accidental starting.

•If the cutting mechanism strikes a foreign object, or if your

Chipper Vac should start to vibrate abnormally, stop the engine immediately, disconnect the spark plug wire and move the wire away from the spark plug. Allow the machine to stop and take the following steps.

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for loose parts and tighten to assure continued safe operation.

•Check all bolts for tightness at frequent intervals to help insure safe operation.

•Check vinyl hard top boot frequently for wear. Replace if worn or damaged.

•Never operate Chipper Vac unless deck adapter, hose, hose adapter (nozzle), discharge chute (elbow), chipper chute and top cover are properly attached in their place.

•Do not remove top cover or attempt to empty contents of cart while engine is running.

•Never attempt to change hose adapter (nozzle) or to install remote hose attachment when engine is running.

•Keep all shields and guards (e.g. chipper chute, discharge chute (elbow) and hose adapter (nozzle) in place and securely attached.

•Keep hands, feet, face, long hair and clothing out of inlet and discharge area. There are ROTATING BLADES inside these openings.

•Always wear safety glasses or otheJ'suitableeye protection when operating or maintaining this equipment.

•Wear protective gloves when feeding material into the chipper chute. Avoid loose fitting clothing.

•Keep face and body clear of the chipper chute to avoid accidental bounce back of any material.

•When feeding material into this equipment, be extremely careful that pieces of metal, rocks, bottles, cans or other foreign objects are not included. Personal injury or damage to the machine could result.

•Do not stand behind cart in exhaust discharge area while engine is running.

•Do not operate this equipment while intoxicated or while taking drugs or medication that impairs the senses and reactions.

•When using this equipment, start with the vehicle transmis- sion in first (low) gear and then gradually increase speed only as conditions permit.

•Operate this equipment at reduced speed on rough terrain,

along creeks and ditches and on slopes to prevent tipping or loss of control. Do not drive too close to a creek or ditch.

•Vehicle braking and stability are affected by the addition of this equipment. Do not fill the Chipper Vac to its full capacity without checking the capability of the towing vehicle to safely pull and stop with the Chipper Vac attached.

•Before operating on any grade (hill) refer to the safety rules in the vehicle owner's manual concerning safe operation on slopes. Also refer to the SLOPE GUIDE on page 27 of this owner's manual. Do not operate on slopes in excess of 10 degrees. STAY OFF STEEP SLOPES.

•Follow the maintenance instructions outlined in this manual.

Look

for this

symbol to point out important safety precautions. It means*-Attentlonl!

Become alert!!

Your

safety

is involved.

 

DANGER: This Chipper Vac was built to be operated according to the rules for safe operation in & this manual. As with any type of power equipment, carelessness or error on the part of the opera-

tor can result in serious injury. This unit is capable of amputating fingers and hands and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

I

I

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Lcrrftshrni Limited Warranty on Craftsman Powered Tractor Attachments Limited Warranty on BatteryPage To Avoid Serious Injury Date of Purchase 486.24516Shown Full Size Not all parts in this list will be used for any one tractor Carton Contents HEX Bolt Tools Required for AssemblyRemoval of Parts from Cartons Assembling the VAC SystemLock Washer Skid PlateWasher HEX Bolt AxletongueTongue Lock NUT Ihex NUT114HEX NUT Washerdumphandle Lock HEX Washer NUTNylock NUT Nylon Washer HexnutTIE ROD HEX Bolt Door Latch Left HandSupports HEX Bolt USE PRE BOLTS, Lock Washers HEX Lock NutsElbow Nylon Washer 25TARP Strap Impeller housing, securing it with the three knobsChipper Chute Assembly Hose Adapter NozzleAssembling the Deck Adapter #62468 to the Mower Deck GO Directly to the Operation Instruc Tions on Deck AdapterLock Nuts Nylon Mower Deck WashersAngle Bracket HEX Lock NUT Nylon Washer Mounting For 1990 and Newer Murray Tractors with a 38 or 40 DeckFor 1990 and Newer Murray Tractors with a 46 Deck Tions Which are Located onKnow Your VAC System Before Starting HOW to Start Your Chipper MACHOW to USE Your Chipper MAC HOW to Stop Your Chipper VACUsing the Chipper Chute Beforeeach USE Engine MaintenanceCleaning Customer ResponsibilitiesNylock Nuts Sharpening or Replacing Chipper BladesPossible Causes ProblemQT¥ Description Part QTY Description62458 Tailgate Reinforcement Bracket Support42TRACTOR Adapter #6246843364 39 24582 3 Hinge, Poly TopSpacer, Housing 29-0241A Harness, Wire 731-1613 Cover, SwitchHousing Assy.Inner Housing Assy.Outer 712-3046 Nut, Hex Jam 5116o18Thd=CD Page Page Get it fixed, your home or ours Au Canada pour service en franais

486.24516 specifications

The Craftsman 486.24516 is a versatile lawn mower designed to cater to the needs of homeowners who seek efficiency and ease of use in lawn maintenance. This model combines robust features with innovative technologies, ensuring that it delivers outstanding performance on the job.

One of the standout features of the Craftsman 486.24516 is its powerful engine. Equipped with a reliable gas engine, it provides ample power for mowing through thick grass and tackling uneven terrain. The engine is engineered for efficiency, offering a balanced performance that ensures longevity and reduced maintenance needs over time.

The mowing deck is another key element of this model. The Craftsman 486.24516 features a wide cutting deck, which allows for a more efficient mowing process by cutting a larger swath of grass in a single pass. The adjustable height settings enhance this functionality, enabling users to customize their cutting height according to their lawn’s requirements. This is particularly useful for maintaining a healthy lawn, as different grass types may thrive at different cutting heights.

For added convenience, the Craftsman 486.24516 comes with an easy-start mechanism. This eliminates the hassle of traditional pull-start engines, allowing users to engage the mower with minimal effort. The model also includes ergonomic handles, designed for comfort and stability, ensuring that users can maneuver the mower effortlessly while reducing fatigue during extended use.

In terms of technology, the Craftsman 486.24516 incorporates advanced features that enhance usability. The mower is designed with a mulching capability, allowing grass clippings to be finely chopped and returned to the soil as natural fertilizer, promoting healthier lawn growth while reducing yard waste. Additionally, the side discharge option provides flexibility, allowing users to choose how they wish to handle clippings based on their lawn care preferences.

Durability is a hallmark of the Craftsman brand, and the 486.24516 is no exception. Constructed with high-quality materials, the mower is built to withstand the rigors of regular use. Its frame and components are designed to resist wear and tear, ensuring that the mower remains reliable throughout its lifespan.

Overall, the Craftsman 486.24516 is a dependable choice for homeowners looking to simplify their lawn care routine. With its powerful engine, adjustable cutting deck, easy-start technology, and durable construction, this lawn mower stands out as a top contender for efficient lawn maintenance.
Top Page Image Contents