Palsonic PMCL-521 Setting the timer, Timer stand-by on / off, Displaying the time

Page 12

Setting the timer

TIMER /SLEEP

FUNCTION

Select the TIMER function.

(Hold pressed the button less than about 1 sec)

(Timer display disappears after about 9 seconds.)

Select, if you want to listen to the radio, tape, CD, or a connected device when the system turns on. Press repeatedly.

Enter 'on' time

Switch to the volume setting.

VOL

Set the volume between MIN, 1 and 29, MAX.

VOL

Switch to the time the machine is to switch off again.

DOWN

UP

Set the hour of the time the

 

 

 

 

machine is to switch on.

DOWN

UP

 

 

 

 

 

Switch to the minute digits.

 

 

DOWN

UP

Set the minutes of the time the machine

 

 

 

 

 

 

 

is to switch on.

 

 

Each time you press the button, you decrease / increase off time from 10 minutes up to 240 minutes.

Timer setting is finished and exit the setting.

Timer stand-by on / off

TIMER /SLEEP

Press the button repeatedly to switch "" timer stand-by to play.

"" timer off.

Displaying the time

CLOCK

The machine shows the time for approx. 4 seconds.

Setting the sleep timer

TIMER /SLEEP

You can set the machine to automatically switch off after a specified time

Select and hold pressed the button over 1 second for the SLEEP function.

TIMER /SLEEP

Each time you press the button, you cut off time from 90 minutes down to 10 minutes (then off).

Checking the timer

Select the TIMER function.

TIMER /SLEEP

12

Image 12
Contents TEL 02 9313 AUSTRALIA1300 657For your own safety 10/1111/12 13/14Installation / Connections InstallationControls Machine181719 Systems display TIMER/SLEEP button Sleep To set Volume Control To set the volume levelCD Play Radio Switching the display contents Searching for a desired programme by PTY codesPress the PTY Search button Press the PTY Search button againTape Recording SkippingProgrammed CD tracks playback Repeat playbackRecording CD Setting the timer Timer stand-by on / offSetting the sleep timer Checking the timerAppendix 30watt Power Automatic level control Voltage AC 110V or 120V 127V orD % 180W