Systems display TIMER/SLEEP button Sleep To set

CONTROLS

Place your sound system

horizontally on a flat, steady base so that air can circulate around it for ventilation.

away from humidity and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top.

About the Power Save Mode.

After switching on your sound system the first time, the machine waits for time setting. See page 11-12 .

If power save mode is set before, power save mode is maintained after power failure.

If power save mode is set before, the machine displays "CLOCK" for a moment, and turn on PSM indicator when connecting AC power.

The remote control is the principal means of control, but the main functions are also available on the front of the machine.

MACHINE

TOP VIEW

(1) CD DOOR

(2) CD DOOR OPEN ( ) button: To open or close the disc compartment. To load / unload CD.

FRONT VIEW

(2)DISPLAY

(3)DOWN/UP : To tune in stations, to set values in programming, to fast reverse or advance tape, CD.

(4)PRESET :To start play for CD and TAPE or to select station presets and reverse play for tape (Option: Auto Reverse only).

(5) PHONES jack: Headphone socket. Plugging in a headphone switches the speakers off. Remote Control Sensor

(6)PSM indicator (optional)

(7)EQ button: This adjustment section lets you

(9)adjust your system's sound to the music style you are listening to such as FLAT, Jazz, Classic, Pops and Rock (Flat means no style).

UBS button: Bass enhancement (on / off).

(10)REC button: To start tape recording.

(11)CLOCK button: To show the current time in the

(12)system's display.

TIMER/SLEEP button: [SLEEP] To set the

(13)minutes after which the system is to switch off automatically. Press repeatedly for a time between 90 and 10 minutes or [TIMER] To select timer setting and to activate / deactivate timer stand-by.

(14)REPEAT/BAND/MODE button :To select repeat play for a track in the CD or to select FM or AM radio in the TUNER. Or to select tape direction (Auto Reverse Only) in the tape. (Option)

(15)ON/STANDBYON/STANDBY.button :To system power Power save mode (Only Europe) : This mode is implemented to reduce power consumption at stand-by operation. At this time, all display are turn off except stand-by mode (power save) L.E.D. (7), SET, Clock, TIMER, Power, Function, Band (on Remote Control Unit) buttons are available at this mode.

1.To set power save mode on : During the machine is power off status, push power button over 3 seconds. If the machine is set to power save mode, automatically turn to power save mode after a few seconds.

2.To set power save mode off : If the machine is set to power save mode, push power button over 3 seconds at power off condition.