Switching the display contents
REPEAT
RDS MODE
To view RDS information on the display, press the RDS MODE key.
Each time you press the button, the display changes to show the following information. PS (Programme Service) PTY (Programme Type) RT (Radio Text) Station frequency
Before the above information is displayed, "WAIT PS", "WAIT PTY", or "WAIT RT" may be appear on the display.
Searching for a desired programme by PTY codes
RANDOM
PTY SEARCH
PRESET
RANDOM
PTY SEARCH
One of the advantages of the RDS service is that you can locate a particular kind of program by specifying the PTY codes.
The PTY Search function is applicable to preset stations only.
To search for a programme using the PTY codes, follow this procedure: Using the remote controller
1. Press the PTY SEARCH button
"PTY" and "SELECT" appear alternately on the display.
2. Press the preset UP or DOWN button (including the one of unit) to select a PTY.
The display changes with each press of the button as shown below:
Pressing the preset UP or DOWN button to the right
NEWS 
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE 
SCIENCE VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M 
WEATHER FINANCE
CHILDREN
SOCIAL A
RELIGION 
PHONE IN
TRAVEL
LEISURE
JAZZ COUNTRY
NATIONAL
OLDIES
FOLK
DOCUMENT
Pressing the preset UP or DOWN button to the left
Press the PTY SEARCH button again
While the search function is running, the selected program type and "SEARCH" alternate on the display. Once the station which is broadcasting the selected PTY (Program type) is located, searching will stop. Then the PTY will be indicated and the broadcast will commence.
If a station broadcasting a selected PTY cannot be found, "NOT" and "FOUND" are displayed just one time alternately on the display. The unit will then return to the station to which it was tuned prior to the start of the PTY Search.
RDS may not work correctly if the station to which you are tuned is not transmitting properly or if the signal strength is weak.
RDS information have to be changed with only remote control unit.
If no adjustment are made in PTY Select mode, "PTY" and "SELECT" will continuously appear on the display Perform the next step while "PTY" and "SELECT" are being displayed.
Page
8