Craftsman 247.776350 manual Operation, Allowmachinetocootatleast5minutes Beforestoring

Page 4

g.Replacegasolinecapandtightensecurely.

h.Ifgasolineisspilled,wipeitofftheengine

andequipmentMovemachinetoanother.

areaWait5minutesbeforestartingthe.

engine.

i.Neverstorethemachineorfuelcontainer insidewherethereisanopenflame,spark, orpilotlight(e.g.furnace,waterheater, spaceheater,clothesdryer,etc.)

j.Toreduceafirehazard,keepmachinefree ofgrass,leaves,orotherdebrisbuild-up.

Cleanupoilorfuelspillageandremoveany fuelsoakeddebris.

k.Allowmachinetocootatleast5minutes

beforestoring.

OPERATION

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper

chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.If it becomes necessary to push material through the shredder hopper, use a small diameter stick. Do not use your hands or feet.

5.If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect spark plug wire and keep away from spark plug. Perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

6.Do not allow an accumulation of processed material to build up in the reduction chamber. This can prevent proper discharge and result in kickback of material through the feed opening.

7.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

8.Never attempt to unclog the chipper chute or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect spark plug wire and keep away from spark plug before clearing debris.

9.Never operate without the shredder hopper, chipper chute, or discharge chute properly attached to the machine. Neverinstalt or remove debris collection bag while the engine is running.

10.Keep all guards, deflectors and safety devices in place and operating properly.

11.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

12.Never operate this machine without good visibility or light.

13.Do not operate this machine on a paved, gravel or non-level surface.

14.Do not operate this machine while under the influence of alcohol or drugs.

15.Muffler and engine become hot and can cause a burn. Do not touch.

16.Never pick up or carry machine while the engine is running.

MAINTENANCE AND STORAGE

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect spark plug wire and keep away from spark plug to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator's manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

WARNING: - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Horse Power Safety Operation Maintenance Storage Espa5ol, pModel No Sears, Roebuck And Co., Hoffman Estates, IL 60179 U.S.AContent Limited Warranty on Craftsman Chipper ShredderThis Warranty does not cover MY-HOMETraining Operation Allowmachinetocootatleast5minutes BeforestoringAfter July 1, 2000, Look For Emissions Compliance Period On Engine Emissions Compliance LabelRemoving Unit From Carton Loose Parts In Carton SeeFigure1Raising the Chipper Chute Lowering the Chipper ChuteAttaching The Debris Collection Bag Emptying the Debris Collection BagMeets Ansi safety standards Know Your Chipper ShredderEnginej Operating Controls See FigureGas And Oil Fill-up Stopping EngineOil one 20-oz. bottle included Starting Engine GasolineFull Type of FuelShredding ChokeDischarge Chute Shredder Screen Housing Cleaning the Reduction ChamberChipping Air Cleaner Knob Cover Cartridge Pre-cleaner Air CleanerCustomerResponsibilities LubricationSpark Plug Cleaning EngineChanging Oil Disconnecting Spark Plug Spark Plug WireReplacing the Chipper Blades Replacing the Shredder BladeCarburetor Adjustment Engine Chipper ShredderProblem Cause RemedySears Emission Control Defects Warranty Coverage Sears Craftsman 7.5 H.P. Chipper Shredder Model Part Description Inlet GuidePage 365 633A D 163 137 276 127 130 %5 276Q 968467 6335z31 Sears Craftsman 7.5 H.P. Chipper Shredder Model 2271524 334 8511330REPA,MANOA, 1 48S.ORTBLOCK Refi 699508 399269 299819 Refi 595 523 524 777S30180 Engine LabelsGarantia limitada de la cortadora trituradora Craftsman Esta garantia no cubrePreparacion Dejequeel motorseenfrieporlomenosdos Dejarespacioparaladilataci6ndel CombustiblePage Extraccibn de la unidad de la caja Piezas sueltas en la caja VerFigura1Deslizamiento hacia abajo del canal de la cortadora Deslizamiento hacia arriba del canal de la cortadoraVaciado de la bolsa de recoleccibn de desechos Colocacibn de la bolsa de recoleccibn de desechosHebina de seguric Controles de funcionamiento vetFigura6 Conozca las propiedades de la cortadora trituradoraCumple con los estbndares de seguridad de Ansi Detencibn del motor Carga de gas y aceiteGasolina Encendido del motorAdvertencia Sea sumamente NosernecesariaVerFigura10 TrituracibnCorte Limpieza de la tolvaLimpieza del canal de reduccibn La horquillaResponsabilidadesdelcliente LubricacibnFiltro de aire PerillaBujia de encendido Limpieza del motorCambio de aceite Reemplazo de las hojas de la cortadora Reemplazo de la hoja de la trituradoraDesconexibn de la bujia Silenciador Filtro deairAjuste del carburador Tuercas conReborde Igura zoCortadora trituradora Causa Remedio FastEncontrada en UR motor certificado Repair Protection Agreements Acuerdo De Proteccibn Para ReparacionesOur Home MY-HOMECanada

247.776350 specifications

The Craftsman 247.776350 is a highly versatile and efficient lawn tractor designed to deliver exceptional performance and comfort for all your mowing needs. This machine is renowned for its robust build quality and reliability, making it a popular choice among homeowners seeking a reliable partner for lawn maintenance.

One of the standout features of the Craftsman 247.776350 is its powerful 19 HP Briggs & Stratton engine. This engine ensures high performance, allowing the tractor to tackle various terrains with ease, including hills and uneven ground. The engine is paired with a hydrostatic transmission, which provides seamless speed control and enhances maneuverability. Users can adjust their speed without the necessity of manual shifting, resulting in a more user-friendly experience.

The cutting deck on the Craftsman 247.776350 is 42 inches wide, which enables efficient mowing over larger areas. This deck is equipped with a three-blade design that delivers a clean and even cut, helping to ensure a healthy lawn appearance. The cutting height can be easily adjusted between multiple positions, catering to various grass types and seasonal growth differences.

Comfort is a top priority with the Craftsman 247.776350, which features an ergonomic operator station. The high-back seat offers ample support during long mowing sessions, while the foot pedal control system makes it easy to engage and disengage the cutting deck without straining.

In terms of technology, the Craftsman tractor is equipped with features designed to enhance usability. The integrated LED headlights provide visibility during early morning or late evening tasks, ensuring safe operation regardless of the time of day. Additionally, the tractor comes with a mulching capability, allowing users to finely chop grass clippings for natural fertilization of the lawn.

Maintenance is simplified with the Craftsman 247.776350; the deck is designed for easy access, and it is recommended to use the washout port for efficient cleaning after mowing. This feature helps to maintain the longevity of the machine and ensures optimum performance.

In summary, the Craftsman 247.776350 combines power, comfort, and advanced technology into a practical lawn tractor. Its strong Briggs & Stratton engine, hydrostatic transmission, and user-friendly features make it an excellent choice for homeowners looking to keep their lawns well-maintained with minimal effort. Whether you have a small yard or a larger property, this lawn tractor offers the reliability and efficiency needed for a beautifully manicured lawn.
Top Page Image Contents