Craftsman 358.79731 Shoulder Strap Adjustment for vacuum use only, Know Your Slower, Fuet Mix

Page 6

SHOULDER STRAP ADJUSTMENT (for vacuum use only)

1.Hold the unit as shown.

2.Pass the shouider strap over your head and onto your right shoulder.

3.Extend you left arm toward the rear of the vacuum bag.

4Adjust shouider strap until the vac- uum bag/shoulder strap seam lies between your thumb and index finger.

5.Make sure air flows freety from the elbow tube into bag. tf bag is kinked, the unit witt not operator properly.

KNOW YOUR SLOWER

READ THiS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNiT Compare the illustrations with your unit to familiarize yourself with the loca- tion of the various controts and adjustments. Save this manual for future refer- ence,

Spark Plug

 

 

Throttle Lever

ON/STOP

 

Primer

 

Switch

 

 

 

 

 

Button

2 _

Fuet Mix

 

Blower

LCehv°_ Z_,_

Starte r

 

 

 

Tube_

 

 

 

Vacuum

Bag

 

 

Elbow

J

Upper

 

 

Tube

Lower

Vacuum Tube

ON/STOP SWITCH

The ON/STOP switch is used to stop the engine, The switch stays in the ON position. To stop engine, push and hoId the switch in the STOP position until the engine comes to a comptete stop.

THROTTLE LEVER

The THRO_LE LEVER controls engine speed. Move it atl the way forward for fuII speed operation. Move it all the way backward for idte speed.

PRIMER BUTTON

The PRIMER BUTTON removes air from the carburetor and fuel tines and fiils

them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate primer button by pressing it and atlowing it to return to its original position.

CHOKE LEVER

The CHOKE helps to suppiy fuet to the engine to aid in cotd starting. Activate the choke by moving the choke tever to the FULL CHOKE position. After en- gine attempts to start, move the choke lever to the HALF CHOKE position. Once engine starts, move choke lever to the RUN position,

-6-

Image 6
Contents Rrftsmr Plan Ahead Full TWO Year Warranty on Craftsman GAS BlowerSears, Roebuck and Co., D/817WA, Hoffman Estates, IL Handle Fuel with CAUTION, tTOperate Your Unit Safely Maintain Your Unit ProperlyBlower Assembly Blower Tube Assembly Carton ContentsAssembly Vacuum BAG AssemblyVacuum Tube Assembly OpeningRibFuet Mix Shoulder Strap Adjustment for vacuum use onlyKnow Your Slower Primer ButtonBefore Starting Engine Operating TipsOperating Position Fueling EngineStarting Engine StartingCheck for Damaged or Worn Parts Clean Unit & LabelsCheck for Loose Fasteners and Parts Replace Spark PlugAdjusting Procedure Replace Fuel FilterCheck Muffler Bolts Internal Engine External SurfacesFuel System OtherTroubleshooting Table Manufacturers WarrantyEred Repair or Replacement Placement and Repair of EmisEmission Control Warranty