JVC VN-C10 manual Preparations, Preparation Procedure, Set the camera in the following procedure

Preparations

Preparation Procedure

Set the camera in the following procedure.

Step 1 Connection and Installation

Attach a lens and connect the power cable, a LAN cable and an alarm etc. Then, install the camera to a fixer, etc. Fix a wire securely for preventing the camera from falling off.

Step 2 Setting the Network

Install the software [V.Networks Controller], and set the network for the PC and VN-C10. Also perform the setting with [V.Networks Setup Tool] and regis- tration of the connected camera with [V.Networks Controller].

☞Page 13

☞Page 19

❈If multiple PCs are in use, first turn on the power for one PC and proceed to 2-4 Other Settings with V.Networks Setup Tool. Only then, turn on the power to a sec- ond PC and go on to 2-4. Repeat the procedure for other PCs. (☞ Page 14)

Step 3 Adjusting the Camera

Adjust the back-focus while checking images. ☞ Page 43

Step 4 Setting with V.Networks Controller

Set image quality and alarm, etc. by using [V.Networks Controller] which has been installed.

Step 5 Operations with V.Networks Controller

Now the camera is ready for recording and playback, etc. with [V.Networks Controller].

Step 6 Operations with a Web Browser

The camera is ready for Web operations.

☞Page 44

☞Page 55

☞Page 61

12