JVC VN-C10 manual Side and rear views

Introduction

Controls, Connectors and Indicators (continued)

(Side and rear views)

90 !

RESET IRIS @

#$ %

	1	2	ISOLATED POWER ONLY			G	2	1	OUT COM
DC12V	AC24V	CLASS 2 ONLY ForUSA		For EUROPE	INPUT				OUTPUT

ALARM

PUSH

POWER 10BASE-T/100BASE-TX

DO NOT CONNECT TO THE

TELEPHONE NETWORK

For USA

9Ventilation opening

For the internal cooling fan. Install the cam- era in a way that does not cover the opening.

0[RESET] button

Press this button to reset VN-C10. If this but- ton is held down for 2 seconds or longer, the values set with [V.Networks Setup Tool] re- turn to those set at the factory, and VN-C10 restarts.

![IRIS] terminal

For connecting with a DC IRIS lens.

(A video iris lens cannot be connected.)

@[POWER] indicator

This indicator starts blinking when the power is turned on. When the camera is ready for network connection, this becomes steady on. If the indicator blinks while the camera is in use, check the camera and/or the network equipment.

^

#[DC 12 V/AC 24 V] Power terminal

For connecting to a DC 12 V or AC 24 V, 50 Hz/ 60 Hz, power source. (☞ Page 14)

$[ALARM INPUT] terminals

For connecting with an external alarm equip- ment. (☞ Page 16)

%[ALARM OUTPUT] terminals

For connecting with an external alarm equip- ment. (☞ Page 16)

^[10 BASE-T/100 BASE-TX]

For network connection with a LAN cable. (☞ Page 15)

10