JVC VN-C10 manual Preparations Setting the Network, 2-2Setting the PC’s IP Address for Windows XP

Preparations (Step 2 Setting the Network)

2-2 Setting the PC’s IP Address for Windows XP

After attaching the camera, proceed to set the IP address of the PC by which the camera is operated.

With Windows XP, follow the procedure below to set the IP address. (For Windows 2000, ☞ Page 22)

Note

Under a DHCP environment and also if the IP address to be allotted to [V.Networks] is already known, skip 2-2 [Setting the PCÕs IP Address].

1.Click .

¥Right-click [My Network] and select [Properties].

2.Select the network connected to the PC by which VN-C10 is operated.

¥Right-click to select [Properties].

Ensure that [Client for Microsoft Networks] is selected .

Note

If either [Client for Microsoft Networks] or [Internet Protocol (TCP/IP)] is not displayed, select [Install ...].

20