Setting and cancellation of passwords can be performed with [V.Networks Setup Tool].
According to access right (authorization) levels, up to 3 passwords (user, operator and administrator) can be set.
Access Right Level | Allowed Actions |
User | Only viewing moving images |
Operator | All operations with [V.Networks Controller] |
Administrator | All of the above and all settings with [V.Networks Setup Tool] |
|
|
Note
Do not forget the passwords as they cannot be changed unless the current, and correct ones are entered.
1. Start up [V.Networks Setup Tool] and select [User], [Operator] or [Administrator].
Enter a password to set password protec- tion or change the password. Entered char- acters are displayed as asterisks (*).
¥ Enter the same password for both boxes. ¥ A password must be alphanumeric and
can be up to 8 characters.
Note
To cancel an existing password, leave the password entry box blank
and click .
Click .
2.The following screen is displayed for confirmation.
Click .
Note
●For a
●
●The security level is highest for the administrator and lowest for the user. If password is set only for lower security level(s), password protection is not effective.
27